Go Down

Topic: Use Ethernet Shield to connect to a compound hostname? (Read 993 times) previous topic - next topic

TheSpy7

Hey all,

I know that the Ethernet code requires an IP to connect to, then the directory/page to connect to which is on that IP. I need to connect to api.tropo.com/myurlhere, but the url for api.tropo.com is the same as tropo.com. Anybody? Here is my code.

Code: [Select]
#include <SPI.h>
#include <Ethernet.h>

// Enter a MAC address for your controller below.
// Newer Ethernet shields have a MAC address printed on a sticker on the shield
byte mac[] = {  my mac address };
IPAddress server(199,230,56,121); // Tropo

// Initialize the Ethernet client library
// with the IP address and port of the server
// that you want to connect to (port 80 is default for HTTP):
EthernetClient client;

void setup() {
// Open serial communications and wait for port to open:
  Serial.begin(9600);
   while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo only
  }

  // start the Ethernet connection:
  if (Ethernet.begin(mac) == 0) {
    Serial.println("Failed to configure Ethernet using DHCP");
    // no point in carrying on, so do nothing forevermore:
    for(;;)
      ;
  }
  // give the Ethernet shield a second to initialize:
  delay(1000);
  Serial.println("connecting...");

  // if you get a connection, report back via serial:
  if (client.connect(server, 80)) {
    Serial.println("connected");
    // Make a HTTP request:
    client.println("GET api.tropo.com/1.0/sessions?action=create&token=mytoken&number=mynumber HTTP/1.0");
    client.println();
  }

Quick5pnt0

There is some information on acessing subdomains here: https://forum.sparkfun.com/viewtopic.php?p=69040

Also try searching this forum for zoomcat's ethernet example.

zoomkat

You might try the "Host:" setup like below.

Code: [Select]

//zoomkat 9-22-12
//simple client test
//for use with IDE 1.0.1
//with DNS, DHCP, and Host
//open serial monitor and send an e to test
//for use with W5100 based ethernet shields

#include <SPI.h>
#include <Ethernet.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //physical mac address

char serverName[] = "web.comporium.net"; // zoomkat's test web page server
EthernetClient client;

//////////////////////

void setup(){

  if (Ethernet.begin(mac) == 0) {
    Serial.println("Failed to configure Ethernet using DHCP");
    // no point in carrying on, so do nothing forevermore:
    while(true);
  }

  Serial.begin(9600);
  Serial.println("Better client test 9/22/12"); // so I can keep track of what is loaded
  Serial.println("Send an e in serial monitor to test"); // what to do to test
}

void loop(){
  // check for serial input
  if (Serial.available() > 0) //if something in serial buffer
  {
    byte inChar; // sets inChar as a byte
    inChar = Serial.read(); //gets byte from buffer
    if(inChar == 'e') // checks to see byte is an e
    {
      sendGET(); // call sendGET function below when byte is an e
    }
  } 
}

//////////////////////////

void sendGET() //client function to send/receive GET request data.
{
  if (client.connect(serverName, 80)) {  //starts client connection, checks for connection
    Serial.println("connected");
    client.println("GET /~shb/arduino.txt HTTP/1.0"); //download text
    client.println("Host: web.comporium.net");
    client.println(); //end of get request
  }
  else {
    Serial.println("connection failed"); //error message if no client connect
    Serial.println();
  }

  while(client.connected() && !client.available()) delay(1); //waits for data
  while (client.connected() || client.available()) { //connected or data available
    char c = client.read(); //gets byte from ethernet buffer
    Serial.print(c); //prints byte to serial monitor
  }

  Serial.println();
  Serial.println("disconnecting.");
  Serial.println("==================");
  Serial.println();
  client.stop(); //stop client

}

Google forum search: Use Google Advanced Search and use Http://forum.arduino.cc/index in the "site or domain:" box.

TheSpy7


You might try the "Host:" setup like below.

Code: [Select]

//zoomkat 9-22-12
//simple client test
//for use with IDE 1.0.1
//with DNS, DHCP, and Host
//open serial monitor and send an e to test
//for use with W5100 based ethernet shields

#include <SPI.h>
#include <Ethernet.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //physical mac address

char serverName[] = "web.comporium.net"; // zoomkat's test web page server
EthernetClient client;

//////////////////////

void setup(){

  if (Ethernet.begin(mac) == 0) {
    Serial.println("Failed to configure Ethernet using DHCP");
    // no point in carrying on, so do nothing forevermore:
    while(true);
  }

  Serial.begin(9600);
  Serial.println("Better client test 9/22/12"); // so I can keep track of what is loaded
  Serial.println("Send an e in serial monitor to test"); // what to do to test
}

void loop(){
  // check for serial input
  if (Serial.available() > 0) //if something in serial buffer
  {
    byte inChar; // sets inChar as a byte
    inChar = Serial.read(); //gets byte from buffer
    if(inChar == 'e') // checks to see byte is an e
    {
      sendGET(); // call sendGET function below when byte is an e
    }
  } 
}

//////////////////////////

void sendGET() //client function to send/receive GET request data.
{
  if (client.connect(serverName, 80)) {  //starts client connection, checks for connection
    Serial.println("connected");
    client.println("GET /~shb/arduino.txt HTTP/1.0"); //download text
    client.println("Host: web.comporium.net");
    client.println(); //end of get request
  }
  else {
    Serial.println("connection failed"); //error message if no client connect
    Serial.println();
  }

  while(client.connected() && !client.available()) delay(1); //waits for data
  while (client.connected() || client.available()) { //connected or data available
    char c = client.read(); //gets byte from ethernet buffer
    Serial.print(c); //prints byte to serial monitor
  }

  Serial.println();
  Serial.println("disconnecting.");
  Serial.println("==================");
  Serial.println();
  client.stop(); //stop client

}




Wow. Thank you so, so much. I seriously cannot express my thanks! It works perfectly.

Go Up