Go Down

Topic: Help with 8x8 led matrix pong! (Read 1 time) previous topic - next topic

1EAS1

I have a 8x8 led monocolor matrix and arduino uno smd edition as well as some ptoentiometers but when ever I try uploading the code, it keeps saying define this, when its already been defined and keeps highlighting.
Heres his website http://blog.bsoares.com.br/arduino/ping-pong-with-8x8-led-matrix-on-arduino
Heres the code
Code: [Select]
/**
  * Ping Pong with 8x8 Led Dot Matrix on Arduino
  *
  * @author  Bruno Soares
  * @website www.bsoares.com.br
  */

#include "TimerOne.h"

#define PIN_LEFT 4
#define PIN_RIGHT 5

unsigned int left = 0;
unsigned int right = 0;
int angle = 0;
int radians;

byte rows[8] = {9, 14, 8, 12, 1, 7, 2, 5};
byte cols[8] = {13, 3, 4, 10, 6, 11, 15, 16};
byte pins[16] = {5, 4, 3, 2, 14, 15, 16, 17, 13, 12, 11, 10, 9, 8, 7, 6};
byte screen[8] = {0, 0, 0, 0, 0, 0, 0, 0};
volatile byte screenRow = 0;
volatile byte screenCol = 0;

int _angle;
int _px;
int _py;
int _w = 7;
int _h = 7;
int _wall[] = {3, 3};
int _count = 0;
int _speed = 3;
int _countPoints = 0;


void setup() {
   Timer1.initialize(100);
   for (int i = 2; i <= 17; i++)
     pinMode(i, OUTPUT);
   Timer1.attachInterrupt(doubleBuffer);
   
  Serial.begin(9600);
   
  face();
   reset();
}

void doubleBuffer() {
   digitalWrite(translatePin(rows[screenRow]), LOW);
   digitalWrite(translatePin(cols[screenCol]), HIGH);
   
  screenCol++;
   if (screenCol >= 8) {
     screenCol = 0;
     screenRow++;
     if (screenRow >= 8) {
       screenRow = 0;
     }
   }
   
  if((screen[screenRow] >> screenCol) & B1 == B1) {
     digitalWrite(translatePin(rows[screenRow]), HIGH);
     digitalWrite(translatePin(cols[screenCol]), LOW);
   } else {
     digitalWrite(translatePin(rows[screenRow]), LOW);
     digitalWrite(translatePin(cols[screenCol]), HIGH);
   }
}

byte translatePin(byte original) {
   return pins[original - 1];
}

void allOFF() {
   for (int i = 0; i < 8; i++)
     screen[i] = 0;
}

void on(byte row, byte column) {
     screen[column-1] |= (B1 << (row - 1));
}

void off(byte row, byte column) {
     screen[column-1] &= ~(B1 << (row - 1));
}

void calcWall()
{
   left = analogRead(PIN_LEFT);
   right = analogRead(PIN_RIGHT);
   left = constrain(map(left, 223, 800, 0, 6), 0, 6);
   right = constrain(map(right, 223, 800, 6, 0), 0, 6);
   
  clearWall();
   
  on(1, left + 1);
   on(1, left + 2);
   on(8, right + 1);
   on(8, right + 2);
   
  _wall[0] = left;
   _wall[1] = right;
   show();
}

void clearWall()
{
   for (int i = 0; i < 8; i++)
     screen[i] &= B01111110;
}

void clearGame()
{
   for (int i = 0; i < 8; i++)
     screen[i] &= B10000001;
}

void loop() {
   calcWall();
   enterFrameHandler();
   delay(50);
}

void enterFrameHandler()
{
   if (_count++ < _speed)
     return;
   
  _count = 0;
   checkCollision();
   calcAngleIncrement();
   show();
}

void retorted(int angle)
{
   Serial.println(angle);
   _angle = angle;
   
  if (++_countPoints % 5 == 0 && _speed > 1)
     _speed--;
}

void resetAnim()
{
   for (int i = 0; i < 8; i++)
   {
     screen[i] = B11111111;
     delay(25);
   }
   for (int i = 0; i < 8; i++)
   {
     screen[i] = B00000000;
     delay(25);
   }
}

void face()
{
   on(1, 1);
   on(1, 2);
   on(2, 1);
   on(2, 2);
   on(7, 1);
   on(7, 2);
   on(8, 1);
   on(8, 2);
   on(1, 1);
   on(1, 2);
   on(4, 4);
   on(4, 5);
   on(5, 4);
   on(5, 5);
   on(2, 7);
   on(7, 7);
   on(3, 8);
   on(4, 8);
   on(5, 8);
   on(6, 8);
   delay(5000);
}

void reset()
{
   resetAnim();
   
  _px = random(3, 5);
   _py = random(3, 5);
   _angle = random(0, 2) == 0 ? 0 : 180;
   _speed = 5;
   _countPoints = 0;
   
  show();
   delay(500);
}

void show()
{
   clearGame();
   on(_px + 1, _py + 1);
}

void checkCollision()
{
   if (_px == _w - 1)
   {
     if (_angle == 315 || _angle == 0 || _angle == 45)
     {
       if (_py == _wall[1] || _py == _wall[1] + 1)
       {
         if (_angle == 0 && _py == _wall[1])
           retorted(225);
         else if (_angle == 0 && _py == _wall[1] + 1)
           retorted(135);
         else if (_angle == 45 && _py == _wall[1])
           retorted(135);
         else if (_angle == 45 && _py == _wall[1] + 1)
           retorted(180);
         else if (_angle == 315 && _py == _wall[1])
           retorted(180);
         else if (_angle == 315 && _py == _wall[1] + 1)
           retorted(225);
       }
     }
   }
   else if (_px == 1)
   {
     if (_angle == 225 || _angle == 180 || _angle == 135)
     {
       if (_py == _wall[0] || _py == _wall[0] + 1)
       {
         if (_angle == 180 && _py == _wall[0])
           retorted(315);
         else if (_angle == 180 && _py == _wall[0] + 1)
           retorted(45);
         else if (_angle == 135 && _py == _wall[0])
           retorted(45);
         else if (_angle == 135 && _py == _wall[0] + 1)
           retorted(0);
         else if (_angle == 225 && _py == _wall[0])
           retorted(0);
         else if (_angle == 225 && _py == _wall[0] + 1)
           retorted(315);
       }
     }
   }
   
  if (_px == _w)
   {
     reset();
   }
   else if (_px == 0)
   {
     reset();
   }
   else if (_py == _h)
   {
     if (_angle == 45)
       _angle = 315;
     else if (_angle == 135)
       _angle = 225;
   }
   else if (_py == 0)
   {
     if (_angle == 225)
       _angle = 135;
     else if (_angle == 315)
       _angle = 45;
   }
}

void calcAngleIncrement()
{
   if (_angle == 0 || _angle == 360)
   {
     _px += 1;
   }
   else if (_angle == 45)
   {
     _px += 1;
     _py += 1;
   }
   else if (_angle == 135)
   {
     _px -= 1;
     _py += 1;
   }
   else if (_angle == 180)
   {
     _px -= 1;
   }
   else if (_angle == 225)
   {
     _px -= 1;
     _py -= 1;
   }
   else if (_angle == 315)
   {
     _px += 1;
     _py -= 1;
   }
}

Can someone fix  the code or tell me how to fix it?
Thanks!

CrossRoads

Did you copy the TimerOne library into your library area?
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

1EAS1


1EAS1

nevermind, I reinstalled TimerOne and it works!
Thanks for the help!

Go Up