(Read 851 times)
Feb 15, 2013, 03:56 am
Uses LED & piezo buzzer to alarm with PIR is tripped.
sketch verified. Uploaded. error message: avrdude: stk500_getsync () : not in sync : resp=0x00.
LED flashes continuously, buzzer = no buzz.
Supposed to be easy project for daughter's science class.
Feb 15, 2013, 04:42 am
You can't upload
sketch, or any sketch?
Please post technical questions on the forum, not by personal message. Thanks!
Feb 15, 2013, 05:15 am
: Feb 15, 2013, 05:19 am by be80be
There to things that cause that error one the reset didn't happen and two you didn't set the com port.
If it's a uno I would make sure I had the com port set right.
Chrome App Beta
Terry has designed broadcast stations, recording studios, broadcast equipment, intelligent machines and special computer languages for IBM, and has worked as a broadcast journalist covering elections, fires, riots and Woodstock. He has taught electronics
Feb 15, 2013, 06:13 am
First: make sure you can upload GOBP (The Good Old Blink Program) On top menu go:
Upload. If same error, CHECK
- Tools>Board (Right board?/)
- Tools> Serial Port (Right port??) IF Serial Port grayed out, your board / USB / ?? is not working.
Let us know what's happening...
This may help: http://arduino-info.wikispaces.com/GettingStarted-Software
Regards, Terry King email@example.com - Check great prices, devices and Arduino-related boards at http://YourDuino.com
Feb 16, 2013, 05:30 am
Thanks for the suggestions. Karma3 nailed it. I didn't have the com port set correctly.