Go Down

Topic: /Project/PIR+Sensor+Arduino+Alarm/72/1 (Read 465 times) previous topic - next topic

GPNikyu

Uses LED & piezo buzzer to alarm with PIR is tripped. 
sketch verified.  Uploaded. error message: avrdude: stk500_getsync () : not in sync : resp=0x00.
LED flashes continuously, buzzer = no buzz.

Supposed to be easy project for daughter's science class.

Suggestions, please.


Nick Gammon

You can't upload this sketch, or any sketch?
http://www.gammon.com.au/electronics

be80be

#2
Feb 15, 2013, 05:15 am Last Edit: Feb 15, 2013, 05:19 am by be80be Reason: 1
There to things that cause that error one the reset didn't happen and two you didn't set the com port.

If it's a uno I would make sure I had the com port set right.

terryking228

Hi,
First: make sure you can upload GOBP  (The Good Old Blink Program)  On top menu go:

File>examples>basics>blink(click) 

Upload. If same error, CHECK
- Tools>Board  (Right board?/)
- Tools> Serial Port (Right port??)  IF Serial Port grayed out, your board / USB / ?? is not working.

Let us know what's happening...

This may help: http://arduino-info.wikispaces.com/GettingStarted-Software
Regards, Terry King terry@yourduino.com  - Check great prices, devices and Arduino-related boards at http://YourDuino.com
HOW-TO: http://ArduinoInfo.Info

GPNikyu

Thanks for the suggestions.  Karma3 nailed it.  I didn't have the com port set correctly. 

Go Up