Pages: [1]   Go Down
Author Topic: /Project/PIR+Sensor+Arduino+Alarm/72/1  (Read 439 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Uses LED & piezo buzzer to alarm with PIR is tripped. 
sketch verified.  Uploaded. error message: avrdude: stk500_getsync () : not in sync : resp=0x00.
LED flashes continuously, buzzer = no buzz.

Supposed to be easy project for daughter's science class.

Suggestions, please.

Logged

Global Moderator
Offline Offline
Brattain Member
*****
Karma: 485
Posts: 18809
Lua rocks!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

You can't upload this sketch, or any sketch?
Logged


Offline Offline
Sr. Member
****
Karma: 3
Posts: 253
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

There to things that cause that error one the reset didn't happen and two you didn't set the com port.

If it's a uno I would make sure I had the com port set right.
« Last Edit: February 14, 2013, 11:19:08 pm by be80be » Logged

Topsham, Vermont USA
Offline Offline
Edison Member
*
Karma: 33
Posts: 1925
... in The Woods In Vermont
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,
First: make sure you can upload GOBP  (The Good Old Blink Program)  On top menu go:

File>examples>basics>blink(click) 

Upload. If same error, CHECK
- Tools>Board  (Right board?/)
- Tools> Serial Port (Right port??)  IF Serial Port grayed out, your board / USB / ?? is not working.

Let us know what's happening...

This may help: http://arduino-info.wikispaces.com/GettingStarted-Software
Logged

Regards, Terry King terry@yourduino.com  - Check great prices, devices and Arduino-related boards at http://YourDuino.com
HOW-TO: http://ArduinoInfo.Info

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks for the suggestions.  Karma3 nailed it.  I didn't have the com port set correctly. 
Logged

Pages: [1]   Go Up
Jump to: