Pages: [1]   Go Down
Author Topic: Robot For Robowar  (Read 1215 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am trying a build a robot for a robowar competition in my college.I am a complete noob!
 This is what i am thinking:-

 Operating 4 High torque 500+ RPM motors using wired controllers (later upgradeable to wireless controller)
 At least 2 weapons one cutter and other a hammer or flipper (or both).

 Option 1:
 Arduino Uno R3 + motor shields (not sure how many motor shields can be added)

 Option 2:
 Use this board . See image!
 This board already have a l293D on port C will add another l293D on port C to control 4 motors.
 Adding another L293D on port B(removing lcd) to control weapons.

 I have no idea on how to make a wired controller.

 P.S. Motors are 500+ rpm geared motor with 0.6A and 12v rating.

* 1359893605742.jpg (566.17 KB, 880x660 - viewed 55 times.)

Offline Offline
Shannon Member
Karma: 223
Posts: 12630
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Don't bother with a wired controller - just get a conventional radio control system with enough channels for all the things you want to control.

I only provide help via the forum - please do not contact me for private consultancy.

the land of sun+snow
Offline Offline
Faraday Member
Karma: 159
Posts: 2927
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

The L293D chips can only handle 600 mA per channel, and are marginal for your
motors. 600 mA is probably the motor run value and not the stall value, but even
so, there are many h-bridges around that will handle more current. Check out the motor controller pages.

Pages: [1]   Go Up
Jump to: