Go Down

Topic: Temperture/humidity sensor ? (Read 411 times) previous topic - next topic

flak88

Hi im looking for a temperature and humidity sensor in one or a separate sensor combination that can interface with a atmega via i2c,spi,analog and with some arduino library support if possible.It is to be used both outdoors and indoors and needs to be capable of the following:

Negative temperatures
Reasonable accurate (no more than 1°C-2°C out if possible)
Temperature resolution in centigrade of .1°C or .01°C (so i can get readings such as 24.98°C etc)
Humidity resolution of .1% would be nice(60.4% humidity etc)   



Which sensors do you recommend ?


Thx

Riva

Though it's not got the temperature resolution you require this might be a good starting point as a device to match your requirements may be a lot more expensive.
Once I almost saw Elvis but then my shovel broke. :(

wwbrown

Do you really need to measure the humidity to a resolution of 0.1%, I ask because if you do absolutely do the sensor is going to cost you a lot of money.  Maybe you could tell us what you are using the measurements for we may be able to help you on your requirements.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy