Pages: [1]   Go Down
Author Topic: Your Idea of My Final Project?  (Read 2467 times)
0 Members and 1 Guest are viewing this topic.
Turkey
Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi everyone,
I want to give an idea for my final project. I will tell you about that project:

I have 3 quadrotors and these quadrotors have ardupilots. One of these will be commander quadrotor and I will
control this quadrotor via computer. So i will setup a wireless network. This is first level of my project.
Secondly, other 2 quadrotors will controlled by commander quadrotor. For example; when i control commander
quadrotor, i will press a key on keyboard. Then, the commander quadrotor will send a command to take off the
other quadrotors. Then, when i will press another key, the other quadrotors will land.

Shortly, my project is in this way. All quadrotors have ardupilot(atmega 2560).
Now, What equipments do I need for sending and taking commands(xbee, arduino wifi shieldsi,...)? Do you know any
sources about computer controlled quadrotor?

Help please...
Logged


Dubuque, Iowa, USA
Offline Offline
Faraday Member
**
Karma: 47
Posts: 2512
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Is your intended scheme going to be:

Computer -> Arduino -> Xbee (or other wireless device)-> Xbee -> Arduino -> Ardupilot?

For the Computer to Arduino part, see http://playground.arduino.cc/Main/InterfacingWithSoftware. Covers pretty much every programming language you can think of.
For the Arduino to Xbee to Xbee  to Arduino part, see http://www.billporter.info/2011/05/30/easytransfer-arduino-library/. This library really simplifies communicating between Arduinos over serial, and since Xbees have a serial interface it kinda makes it a done deal. There are a lot of non-Xbee devices that have serial interfaces so an Xbee specifically is not required, but I'll leave it to your discretion as to what might work better. I do know that Xbees are frequently used with RC planes for telemetry so they're kinda tried and true there.
For the Arduino to Ardupilot part, see http://arduino.cc/en/Reference/Servo. This would let you send commands to the Ardupilot using the same method that an RC receiver would.
Logged

Johannesburg. UTC+2
Online Online
Faraday Member
**
Karma: 95
Posts: 4338
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Wow....

I know nothing about any of that stuff, but I commend you on your project. I hope it goes well and although I won't be able to help I'm looking forward to seeing this on YouTube!
Logged

Roy from ITCrowd: Have you tried turning it off an on again?
I'm on LinkedIn: http://www.linkedin.com/in/jimbrownza

Turkey
Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks @Chagrin, i will read all of them. @JimboZA i hope that we will watch a video on youtube smiley-wink
Logged


Turkey
Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Does anybody know code example about quadrotor control over the pc?
Logged


Miami/Florida
Online Online
Sr. Member
****
Karma: 14
Posts: 344
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Can your quadrotors hold the weight of what you want to install in them?
Logged

Perseverance is 90% of the solution. The remaining 10% is more perseverance.

Turkey
Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

About 4 kg
Logged


Turkey
Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi we tried some codes on arduino, but i don't know that how is it work? When we finish that project, i share the last video smiley

http://www.youtube.com/watch?v=PPLeDgqwwgY&feature=youtu.be
Logged


Pages: [1]   Go Up
Jump to: