Go Down

Topic: Converting old hardware serial code to newsofwareserial code (Read 626 times) previous topic - next topic

JT007

im working away on some old modbus communication examples but unfortunately they use the hardware serial port to transmit/receive.
could someone please suggest how it can be changed to use NewSoftwareSerial instead.

Code: [Select]
void setup()
{
        const int baudrate = 9600;
        if (baudrate <= 19200)
                interframe_delay = (unsigned long)(3.5 * 11 / baudrate);  /* Modbus t3.5 */
        Serial.begin(baudrate); /* format 8N1, DOES NOT comply with Modbus spec. */
}


johnwasser

1) Use Arduino 1.0 or newer and SoftwareSerial
2) Create a SoftwareSerial object (http://arduino.cc/en/Reference/SoftwareSerial)
3) Use that in place of Serial.
Code: [Select]

#include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11); // RX, TX
void setup()
{
        const int baudrate = 9600;
        if (baudrate <= 19200)
                interframe_delay = (unsigned long)(3.5 * 11 / baudrate);  /* Modbus t3.5 */
        mySerial.begin(baudrate); /* format 8N1, DOES NOT comply with Modbus spec. */
}
Send Bitcoin tips to: 1G2qoGwMRXx8az71DVP1E81jShxtbSh5Hp

JT007


Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy