Go Down

Topic: Your Idea of My Final Project? (Read 3847 times) previous topic - next topic


Hi everyone,
I want to give an idea for my final project. I will tell you about that project:

I have 3 quadrotors and these quadrotors have ardupilots. One of these will be commander quadrotor and I will
control this quadrotor via computer. So i will setup a wireless network. This is first level of my project.
Secondly, other 2 quadrotors will controlled by commander quadrotor. For example; when i control commander
quadrotor, i will press a key on keyboard. Then, the commander quadrotor will send a command to take off the
other quadrotors. Then, when i will press another key, the other quadrotors will land.

Shortly, my project is in this way. All quadrotors have ardupilot(atmega 2560).
Now, What equipments do I need for sending and taking commands(xbee, arduino wifi shieldsi,...)? Do you know any
sources about computer controlled quadrotor?

Help please...


Is your intended scheme going to be:

Computer -> Arduino -> Xbee (or other wireless device)-> Xbee -> Arduino -> Ardupilot?

For the Computer to Arduino part, see http://playground.arduino.cc/Main/InterfacingWithSoftware. Covers pretty much every programming language you can think of.
For the Arduino to Xbee to Xbee  to Arduino part, see http://www.billporter.info/2011/05/30/easytransfer-arduino-library/. This library really simplifies communicating between Arduinos over serial, and since Xbees have a serial interface it kinda makes it a done deal. There are a lot of non-Xbee devices that have serial interfaces so an Xbee specifically is not required, but I'll leave it to your discretion as to what might work better. I do know that Xbees are frequently used with RC planes for telemetry so they're kinda tried and true there.
For the Arduino to Ardupilot part, see http://arduino.cc/en/Reference/Servo. This would let you send commands to the Ardupilot using the same method that an RC receiver would.



I know nothing about any of that stuff, but I commend you on your project. I hope it goes well and although I won't be able to help I'm looking forward to seeing this on YouTube!
Johannesburg hams call me: ZS6JMB on Highveld rep 145.7875 (-600 & 88.5 tone)
Dr Perry Cox: "Help me to help you, help me to help you...."
Your answer may already be here: https://forum.arduino.cc/index.php?topic=384198.0


Thanks @Chagrin, i will read all of them. @JimboZA i hope that we will watch a video on youtube ;)


Does anybody know code example about quadrotor control over the pc?


Can your quadrotors hold the weight of what you want to install in them?
Perseverance is 90% of the solution. The remaining 10% is more perseverance.




Hi we tried some codes on arduino, but i don't know that how is it work? When we finish that project, i share the last video :)


Go Up