Pages: [1]   Go Down
Author Topic: arduino with relay shields  (Read 194 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hallo,
is adrunio UNO mit 4 channels relay shields  good for deterministic Timing controll or real time system?

i am trying to mit adrunio  UNO and relay shields deterministic Timing switch on or off between two DC Power:for example,DC Power#1 one channel(3.5V) output on,another DC Power#2 three channel(1v,+18V,-18V) output off,after 20s DC Power#1 one channel output off,another DC Power#2 three channel on, after 10s DC Power#1 one channel(3.5V) output on,another DC Power#2 three channel(1v,+18V,-18V) output off,like this periodically switching on or off.
 i hope to with  Labview progamming kontroll this Switching ,und no data transmission delay in the second range.
« Last Edit: March 10, 2013, 07:09:32 am by kaijetfire » Logged

Croatia
Offline Offline
Sr. Member
****
Karma: 11
Posts: 443
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Are you using Google translate to translate from German? If yes, then posting on German section might be a good idea.
http://arduino.cc/forum/index.php/board,31.0.html

As for your question, if I understood you correctly then yes, you can use Arduino to control multiple relays based on a preprogrammed program or based on real time decision making.
Logged

Pages: [1]   Go Up
Jump to: