Pages: [1]   Go Down
Author Topic: IDE 1.0.4 Esplora Example Errata  (Read 1205 times)
0 Members and 1 Guest are viewing this topic.
US
Offline Offline
Full Member
***
Karma: 4
Posts: 183
Electronics are the new Legos
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

This topic is an FYI on errata in the Esplora 1.0.4 examples and is meant as an aid to the Arduino team.

1. Function EsploraWriteRGB - http://arduino.cc/en/Reference/EsploraWriteRGB

#include <Esplora.h>

void setup() {}

void loop()
{
 Esplora.writeRGB(0, 128, 255);
 delay(1000);
 Esplora.writeRGB(255, 0, 128);
 delay(1000);
 Esplora.writeRGB(128, 255, 0);
}

Remedy: should have a line "delay(1000); after the last line in loop function else that last color is not displayed long enough to notice the color change.

2. Esplora.tone - http://arduino.cc/en/Reference/EsploraTone
    Esplora.noTone - http://arduino.cc/en/Reference/EsploraNoTone

No example given

Remedy: refer to example http://arduino.cc/en/Tutorial/EsploraMusic which uses both functions.

3. Example Page http://arduino.cc/en/Reference/EsploraLibrary

Text: "EsploraLightCalibrator : Read the values from the accelerometer"

Remedy: Read as: "EsploraLightCalibrator : Read the values from thelight sensor"
Logged

Pages: [1]   Go Up
Jump to: