Go Down

Topic: aproblem with esc ????????? please help me (Read 715 times) previous topic - next topic

mahmoud_elshahawy

please i build my first quad copter project using arduino > i use 4 esc's and i have a problem that 2 of my esc's start rotating from angle 100 and another one starts from angle 40 and the last starts from 70 . and i changed them many times and every time i change the new esc's start from different angles
the question is what is wrong with these esc's ? and how can i fix that problem

PaulS

Which Software on the Computer is causing this problem?

mahmoud_elshahawy

i don't know i tried all esc's many times and  don't know where is the wrong

AWOL

Quote
the question is what is wrong with these esc's ?

No, the questions are:
1. Which ESCs are you talking about
2. Where is your code
3. Where is your schematic?

(4. What is wrong with your '?' key?)
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

michael shiloh

Hi Mahmoud,

Welcome to the forum. We will do our best to help you. However, we need more details about your hardware and software before we can help. Please follow the guidelines here to help us help you:

How to use this forum

At the very least, answer the 3 questions that AWOL indicated and we'll see what we can figure out.

Looking forward to schematics, part numbers, and code, and then we'll get to work.

Sincerely,
Michael

mahmoud_elshahawy

my esc type is pentium 20a esc 
my motor is sunny sky 980kv
and i use the example of servo motors "sweep" in arduino program examples

AWOL

These:
http://www.megarc.com/mystery-pentium-20a-esc-inbuild-2a-bec-p-1083.html
http://www.himodel.com/electric/SUNNYSKY_X2212-980KV_2-3s_Outrunner_Brushless_Motor.html
?
(you could have posted similar links)

What about the answers to the other questions?
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

mahmoud_elshahawy

this is the motor
http://www.himodel.com/electric/SUNNYSKY_Angel_Series_A2212-980KV_2-3S_Airplane_Outrunner_Brushless_Motor.html
and that is the esc
http://www.megarc.com/mystery-pentium-20a-esc-inbuild-2a-bec-p-1083.html

what other questions ?
i told you that the code is the example "sweep" from servo library in arduino program


AWOL

"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

retrolefty


no one know what is wrong ?


Probably not. Unless someone owned that specific ESC/motor combination and had experienced the same problem symptom you are, why would your expect otherwise?

Lefty

Go Up