« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: Arduino+ RF  (Read 246 times)
0 Members and 1 Guest are viewing this topic.
husein06
Offline Offline
Jr. Member
**
Karma: 0
Posts: 53
View Profile
« on: March 13, 2013, 02:23:53 pm »
 Bigger Bigger Smaller Smaller Reset Reset
I recently bought these:
https://www.sparkfun.com/products/10535
RF Link Transmitter - 315MHz
https://www.sparkfun.com/products/10533
RF Link Receiver - 4800bps (315MHz)

All I want to do is:
Light up an LED on another breadboard.
On one side I have Arduino>RF Transmitter.....RF Receiver< LED

Is this possible?
Just send a digital high to the input of the transmitter and connect the output of the receiver to an LED and it will work?
Logged

AWOL
Global Moderator
UK
Offline Offline
Brattain Member
*****
Karma: 236
Posts: 24268
I don't think you connected the grounds, Dave.
View Profile
« Reply #1 on: March 13, 2013, 02:28:29 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Quote
Just send a digital high to the input of the transmitter and connect the output of the receiver to an LED and it will work?
I doubt the output will source or sink enough current to light a LED.
Also, expect interference from neighbours remotes, doorbells, garage door openers...
Logged
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

HazardsMind
Queens, New York
Offline Offline
Faraday Member
**
Karma: 65
Posts: 2921
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
« Reply #2 on: March 13, 2013, 02:47:18 pm »
 Bigger Bigger Smaller Smaller Reset Reset
I imagine an Arduino is somewhere in the mix too, right? You need to download the Virtualwire library.
Logged
Created Libraries:
NPV2 (NewPasswordV2),  TFT_Extension, OneWireKeypad, SerialServo.
Will provide libraries if asked in PM or forum.

mauried
Australia
Offline Offline
Sr. Member
****
Karma: 9
Posts: 409
View Profile
« Reply #3 on: March 13, 2013, 04:31:32 pm »
 Bigger Bigger Smaller Smaller Reset Reset
You need at a minimum 2 arduinos, one transmitting and 1 receiving using virtualwire, or you can use some specialised hardware designed for doing this.
A pair of SC2262 / SC2272 encoder decoder chips will do all the hard work.
Logged

Pages: [1]   Go Up
« previous topic   next topic »
Jump to: