Go Down

Topic: LCD information requested (Read 1 time) previous topic - next topic

Pedro147

Mar 16, 2013, 10:41 pm Last Edit: Mar 16, 2013, 10:46 pm by Pedro147 Reason: 1
I was wondering if anyone had any information about an LCD display
P16245B-C R3
I removed it from a Samsung telephone with the view of seeing if I could find out how to drive it with Arduino. When I Googled the p/n the only pages that came up, that  I thought I could recognise were from Asian and Russian electronics forums. Someone on one of these forums suggested this as a possible pinout via  Google translate

1: 0
2 5V
3: Vo
4: RS
5: RW
6: E
7: DB0
8: DB1
9: DB2
10: DB3
11: DB4
12: DB5
13: DB6
14: DB7

Seeing as I cannot attach a row of header pins to the display, what is the best way  to access the traces of the hard plastic ribbon cable. Also if these pinouts seem plausible, what should I try and control it with,LiquidCrystal library ? Thanks for any possible suggestions, let the hacking commence.   8)
http://www.pedroduino.com

floresta

#1
Mar 17, 2013, 03:20 pm Last Edit: Mar 17, 2013, 03:22 pm by floresta Reason: 1
It looks like it may be a regular run-of-the-mill character mode LCD.  Have you tried the tutorial in the Arduino playground (http://arduino.cc/en/Tutorial/LiquidCrystal)?

Quote
... what is the best way  to access the traces of the hard plastic ribbon cable.

Sorry, I can't see the other end of the cable.

Don

Pedro147

Sorry about the picture quality Don
http://www.pedroduino.com

floresta

Quote
Sorry about the picture quality Don

I was going to make a snide remark about my camera not being very good at making phone calls but I see that you actually used a real camera.

Anyway, it looks like your best bet will be to solder wires to the pads on the end of the cable and stick the other ends into a breadboard.


Don

Pedro147

Thanks Don, that will test my soldering prowess  8)
http://www.pedroduino.com

tack

Why not just de-solder the ribbon cable and solder your own wires on? Might be easier.

Is it a 2 line display? The '162' in the 'P16245B-C R3' code *could* signify 16x2. It's a wild guess as there's no image of the front.

floresta

#6
Mar 18, 2013, 01:19 am Last Edit: Mar 18, 2013, 01:21 am by floresta Reason: 1
Quote
Why not just de-solder the ribbon cable and solder your own wires on? Might be easier.

I suggested leaving the cable intact because the flexibility of the cable between the display and the breadboard will make it easier to move the display around to where it is visible.

Quote
Is it a 2 line display? The '162' in the 'P16245B-C R3' code *could* signify 16x2.

Most likely it is a 16x2 for the reason you mention, but it really doesn't matter at this point.  Once he gets power applied the configuration will become apparent.

Don

Pedro147

Thanks for your suggestions gents. I'm with you regarding the flexibility rationale Don. I'll see how I go.
http://www.pedroduino.com

Pedro147

I eventually got around to connecting up the LCD... nice and big display  8)
http://www.pedroduino.com

codlink

//LiNK

Pedro147

Thanks codlink. Yes it is bigger than the Chinese Ebay ones that I have bought, but unfortunately no backlight.Oh well there is something satisfying about getting one out of a telephone that is going to landfill  8)
http://www.pedroduino.com

codlink

Makes me want to go around looking for old LCDs and displays.
//LiNK

Go Up