Go Down

Topic: PHP / XAMP web server / x10 module (smart home) (Read 1 time) previous topic - next topic


dear all, i made simple interface HTML to control light via light module form X10 ( on / off / dim / bright ) and for fan ( on /off ) but i would like to make it in PHP page with mySQL .

i use arduino uno with Ethernet shield and i want the ardunio take the command form the server XAMPP and to be as client .

my code :

Code: [Select]

  Web Server with X10 Firecracker control
  No need for a app, or a program on the PC, this simple arduino program allows web based html button control of the arduino from any browser, on a PC, IPAD, IPOD, smart phone. 

* Ethernet shield attached to pins 10, 11, 12, 13
*  x10 Firecracker attaches to pins 8 and 9


#include <SPI.h>
#include <Ethernet.h>
#include <X10Firecracker.h>
#include <WString.h>

#define RTS_PIN     8                 // RTS line for C17A - DB9 pin 7
#define DTR_PIN     9                 // DTR line for C17A - DB9 pin 4
#define BIT_DELAY   1                   // mS delay between bits (1 mS OK)

// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress ip(192,168,1,178);

String s = String(30); //string for fetching data from address
String cmd = "/X" ; //X is an example of the command that will come after the ethernet address in the GET...

// Initialize the Ethernet server library
// with the IP address and port you want to use
// (port 80 is default for HTTP):
EthernetServer server(80);

void setup() {
// Open serial communications and wait for port to open:
   while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo only
  Serial.print("Pgm started  ");

  // start the Ethernet connection and the server:
  Ethernet.begin(mac, ip);
  Serial.print("server is at ");


void loop() {
  // listen for incoming clients
  EthernetClient client = server.available();
  if (client) {
    Serial.println("new client");
    // an http request ends with a blank line
    boolean currentLineIsBlank = true;
    boolean DoPage=true;
    while (client.connected()) {
        if (client.available()) {
               char c = client.read();
               if (s.length() < 7) { s.concat(c); }   // build up a short string to parse
               if(s.substring(0,3) == "GET" & DoPage)
               {    // check for the GET from the web page
                     cmd=s.substring(4,6);        // get the 2 letters in the string out and call this the CMD,  /A, or /B or /H etc, these come in after the GET
                     // Serial.println("CMD=");
                     // Got a GET so, compare the received command to the specific command and then do something
                     if (cmd == "/A" && DoPage) {
                                Serial.println(F("Turn on the Light"));     
                                X10.sendCmd( hcA, 1, cmdOn );
                               DoPage = false;
                      if (cmd == "/B" && DoPage) {
                                Serial.println(F(" Light Dim"));
                                X10.sendCmd( hcA, 1, cmdDim );
                               DoPage = false;
                     if (cmd == "/H" && DoPage) {
                                Serial.println(F(" Light Bright"));
                                X10.sendCmd( hcA, 1, cmdBright );
                               DoPage = false;
                     if (cmd == "/C" && DoPage) {
                                Serial.println(F("Turn Off the light"));
                                X10.sendCmd( hcA, 1, cmdOff );
                               DoPage = false;
                     if (cmd == "/M" && DoPage) {
                                Serial.println(F("Turn On the FAN"));     
                                X10.sendCmd( hcA, 2, cmdOn );
                               DoPage = false;
                      if (cmd == "/O" && DoPage) {
                                Serial.println(F("Turn Off the FAN"));
                                X10.sendCmd( hcA, 2, cmdOff );
                               DoPage = false;
              // if you've gotten to the end of the line (received a newline
              // character) and the line is blank, the http request has ended,
              // so you can send a reply
              if (c == '\n' && currentLineIsBlank) {
              // send a standard http response header
                      client.println(F("HTTP/1.1 200 OK"));
                      client.println(F("Content-Type: text/html"));
                      client.println(F("Connnection: close"));
                      client.println(F("<!DOCTYPE HTML>"));
                      client.println(F("<meta content='text/html; charset=ISO-8859-1'http-equiv='content-type'>"));
                      client.println(F("<title>Welcome to Alwafi Arduino Program"));
                      // the next line sets the background color to something nice like blue
                      client.println(F("<body style='background-color: rgb(0, 0, 153); color: rgb(255, 255, 0);'alink='#cc6600' link='#cc0000' vlink='#993300'>"));
                      //  load in a background .jpg for the web page.
                      client.println(F("<BODY BACKGROUND='http://www.aou.edu.kw/images/hand2.JPG' style='width: 481px; height: 690px;'></span><br>"));
                      //  set up some HTML that has buttons with specific actions that link back to the arduino at the address of the arduino and have a specific string
                      client.println(F("<FORM METHOD='LINK' ACTION='\r'><INPUT TYPE='submit' VALUE='Turn on the Light'></FORM>  "));                 
                      client.println(F("<FORM METHOD='LINK' ACTION='\r'><INPUT TYPE='submit' VALUE='Turn Off the light'></FORM>  "));
                      client.println(F("<FORM METHOD='LINK' ACTION='\r'><INPUT TYPE='submit' VALUE='dim light'></FORM>  "));
                      client.println(F("<FORM METHOD='LINK' ACTION='\r'><INPUT TYPE='submit' VALUE='Bright the light'></FORM>  "));
                      client.println(F("<FORM METHOD='LINK' ACTION='\r'><INPUT TYPE='submit' VALUE='Turn On the FAN'></FORM>  "));
                      client.println(F("<FORM METHOD='LINK' ACTION='\r'><INPUT TYPE='submit' VALUE='Turn Off the FAN'></FORM>  "));         
                      // Clear out the received string
                if (c == '\n') {
                      currentLineIsBlank = true;
                else if (c != '\r') {
                      currentLineIsBlank = false;
    Serial.println("client disonnected");
}  // end


need your help to make my interface for controlling the device (PHP page) rather than simple HTML in the ardunio ??

Go Up