Go Down

Topic: Serial Monitor works with FTDI but crashes with bluetooth Module (Read 666 times) previous topic - next topic

Cue2

Using a HC-05 bluetooth module I cannot enter commands with Serial Monitor (serial monitor hangs) but Tera Term seems to work with this script

Code: [Select]
char INBYTE;
int  LED = 13; // LED on pin 13

void setup() {
  Serial.begin(9600);
  pinMode(LED, OUTPUT);
}

void loop() {
  Serial.println("Press 1 to turn Arduino pin 13 LED ON or 0 to turn it OFF:");
  while (!Serial.available());   // stay here so long as COM port is empty   
  INBYTE = Serial.read();        // read next available byte
  if( INBYTE == '0' ) digitalWrite(LED, LOW);  // if it's a 0 (zero) tun LED off
  if( INBYTE == '1' ) digitalWrite(LED, HIGH); // if it's a 1 (one) turn LED on
  delay(50);
}


I've set the baud rate appropriately, I think I must have because tera term seems to work at that baud.
Any ideas? Alternatively is there a way of making tera term behave more like serial monitor? i.e inputting a string of commands which are sent when you press the return key.

Same thing here !
I have this simple program loaded onto the Arduino:
void setup() {
  Serial.begin(38400);
}

void loop() {
  Serial.println("Toto\n");
  delay(500);
}

And when I connect TeraTerm to the serial port corresponding to the Bluetooth module, I see the corresponding data appearing.
However when I close TeraTerm and try to use Arduino's SerialMonitor, I get:

processing.app.SerialNotFoundException: Serial port 'COM9' not found. Did you select the right one from the Tools > Serial Port menu?
   at processing.app.Serial.<init>(Serial.java:191)
   at processing.app.Serial.<init>(Serial.java:92)
   at processing.app.SerialMonitor.openSerialPort(SerialMonitor.java:207)
   at processing.app.Editor.handleSerial(Editor.java:2481)
   at processing.app.Editor$17.actionPerformed(Editor.java:665)
   at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
   at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
   at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
   at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
   at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
   at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
   at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
   at java.awt.Component.processMouseEvent(Component.java:6263)
   at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
   at java.awt.Component.processEvent(Component.java:6028)
   at java.awt.Container.processEvent(Container.java:2041)
   at java.awt.Component.dispatchEventImpl(Component.java:4630)
   at java.awt.Container.dispatchEventImpl(Container.java:2099)
   at java.awt.Component.dispatchEvent(Component.java:4460)
   at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
   at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
   at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
   at java.awt.Container.dispatchEventImpl(Container.java:2085)
   at java.awt.Component.dispatchEvent(Component.java:4460)
   at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
   at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
   at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
   at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
   at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
   at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
   at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
processing.app.SerialNotFoundException: Serial port 'COM9' not found. Did you select the right one from the Tools > Serial Port menu?
   at processing.app.Serial.<init>(Serial.java:191)
   at processing.app.Serial.<init>(Serial.java:92)
   at processing.app.SerialMonitor.openSerialPort(SerialMonitor.java:207)
   at processing.app.Editor.handleSerial(Editor.java:2481)
   at processing.app.Editor$17.actionPerformed(Editor.java:665)
   at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
   at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
   at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
   at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
   at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
   at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
   at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
   at java.awt.Component.processMouseEvent(Component.java:6263)
   at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
   at java.awt.Component.processEvent(Component.java:6028)
   at java.awt.Container.processEvent(Container.java:2041)
   at java.awt.Component.dispatchEventImpl(Component.java:4630)
   at java.awt.Container.dispatchEventImpl(Container.java:2099)
   at java.awt.Component.dispatchEvent(Component.java:4460)
   at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
   at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
   at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
   at java.awt.Container.dispatchEventImpl(Container.java:2085)
   at java.awt.Component.dispatchEvent(Component.java:4460)
   at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
   at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
   at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
   at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
   at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
   at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
   at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)


Any help would be really welcome !
Dan
http://trandi.wordpress.com

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy