QuoteNo on the "voltage divider" idea.Why?
No on the "voltage divider" idea.
Daveste,You could replace the 3.3 v regulator, if you like soldering SMT parts, that is.If you need help finding it, then it is probably beyond the scope of your (present) abilities.A TO92 LM33 regulator with a .1uf cap on the input, and a 10uf electrolitic cap on the output should run an SD card, but I would check. They can use a lot of current to write.See the datasheet for the regulator for simple circuits to wire it up. regulator: http://www.digikey.com/product-detail/en/LP2950-33LPRE3/296-31455-1-ND/3505910TomJ
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16