Pages: [1]   Go Down
Author Topic: How Do I Control This Display  (Read 483 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Jr. Member
Karma: 0
Posts: 56
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

How Can I Control This Display Arduino Mega 2560.

Is There Any Libraries, What Hardware Do I Need?

Pictures Of LCD:

Thank You In Advance.

The Netherlands
Offline Offline
Edison Member
Karma: 51
Posts: 1729
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

You are posting a link to some obscure site where people have to login.
Not the best choice when seeking help.

Have a look at "blink without delay".
Did you connect the grounds ?
Je kunt hier ook in het Nederlands terecht:,77.0.html

Leeds, UK
Online Online
Edison Member
Karma: 80
Posts: 1730
Once the magic blue smoke is released, it won't go back in!
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

The answer is, you don't. An arduino is nowhere near fast enough to control such a display as the display has no controller built in - you have to generate the pixel clock, HSync, VSync, Data Enable, and data pins.
I tried such a thing before (different screen, but same principal) using an arduino and even with near perfect optimisation of code I could only get to 1/10th the required pixel clock frequency which is so far out of spec that the screen won't accept it.

Interestingly actually this is an Analog display not a digital one (FG020510A). But still, the clock rate required is far beyond the capability of an arduino.
« Last Edit: April 05, 2013, 06:08:59 pm by Tom Carpenter » Logged


Pages: [1]   Go Up
Jump to: