Pages: [1]   Go Down
Author Topic: Circuits.io - Free PCB Design tool.  (Read 950 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Sr. Member
****
Karma: 6
Posts: 429
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset



http://www.circuits.io/

Not used this myself, but maybe of interest to those not wanting to learn EagleCad.

Logged

The Netherlands
Offline Offline
Edison Member
*
Karma: 50
Posts: 1717
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

It's free, so what is the price to pay ?
Can't find that out by quickly scanning the site without signing in.
Are all designs public or published ?
What's the catch ?
Logged

Have a look at "blink without delay".
Did you connect the grounds ?
Je kunt hier ook in het Nederlands terecht: http://arduino.cc/forum/index.php/board,77.0.html

Offline Offline
Sr. Member
****
Karma: 6
Posts: 429
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I imagine that any designs made using this are made public on the website.
You`d have to ask/contact them to be sure.

 I think I read on that site that you can export gerbers, so you can get the boards made elsewhere.
Logged

Global Moderator
Boston area, metrowest
Offline Offline
Brattain Member
*****
Karma: 548
Posts: 27372
Author of "Arduino for Teens". Available for Design & Build services. Now with Unlimited Eagle board sizes!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I vow to not use any cloud based software. Anything I have tried so far has been too sllow.
Logged

Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Phoenix, Arizona USA
Offline Offline
Faraday Member
**
Karma: 40
Posts: 5600
Where's the beer?
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I vow to not use any cloud based software. Anything I have tried so far has been too sllow.

Speed would be the least of my worries - did you hear what happened to Tinkercad? Probably the easiest to use online 3D CAD program around, designed to allow you to quickly create models, etc - store them online or download the an STL file to send to your 3D printer (or upload to several 3D printing services if you wanted). I had heard about them some time ago, then about a week or so ago I decided to give them a longer "try" - and inside of a couple of hours, I had designed a simple bracket meant to hold a laser module (like something you'd mount on a robot or such). It was accurate down to a fraction of a millimeter; I was seriously tempted to have the STL file printed. I realized that this was the software I had been looking for to jump into 3D printing - CAD software is anything but easy, but they had made it easy - extremely easy, and affordable, too.

Then a couple of days later, they sent out a press release stating they were discontinuing the software to focus on a different market segment which would be based around the distributed 3D engine they had created for processing the Tinkercad modeling - and this new system would be for the simulation market. Tinkercad is no more.

...and there isn't a comparable piece of software to replace it, either. I started playing around with other options - the best I have found - so far - has been FreeCAD - but even it is no where near as simple and easy to use as Tinkercad. Shapesmith is a nice online and similar piece of software (and open source and free), but it still has a long ways to go before it can be like Tinkercad. Other offerings either won't work for me (Sketchup is Windows only - and barely works in Wine - and isn't simple to work with, either) - or are way, way too complex (Blender, for instance). I've thought about things like OpenSCAD (and OpenJSCAD, etc) - I like the nature of "program your parts" - but at the same time, it seems a bit abstract.

Tinkercad had built up a great community, got a lot of great testing, then tried to switch to a pay model that people apparently balked at (personally, I thought $20.00 a month was an absurd bargain for what you got); now that community has nothing to replace it, and likely won't support anybody wanting donations to fund a development effort, either (since they wouldn't pay for access for the low-cost Tinkercad offering)...

I can't blame Tinkercad for doing what they did - they need to make money to survive as a business, and apparently, there isn't money to be made from 3D printer enthusiasts for easy-to-use 3D CAD software (which I don't get - it's the software that's the toughest part of 3D printing - at least, if you want to do anything custom). Even so - they pulled the rug out from under a lot of people - and now those people have few options to select - currently - on where to go for similar software.

Cloud software support that can just go "poof!" one day reminds me of proprietary closed-source software, that can easily do the same thing (or the company go under) - I guess that's why I am now throwing my lot in with open solutions at least as far as CAD goes - as well as circuit design. Hopefully more people wise up and get tired of being "burned" by proprietary and closed source offerings.

Something makes me doubt it, though...
Logged

I will not respond to Arduino help PM's from random forum users; if you have such a question, start a new topic thread.

Pages: [1]   Go Up
Jump to: