Go Down

Topic: Compile Errors (Read 988 times) previous topic - next topic

mrjonny2

Hi, I am trying to port 2boots to the Arduino Mega (running a 3.3v and 8Mhz)

The following code seems to produce this error message can someone shed some light please?

Code
https://github.com/mrjonny2/embedded

Error
Code: [Select]
avr-gcc -g -Wall -Os -funsigned-char -fno-split-wide-types -fno-inline-small-functions -mcall-prologues -ffunction-sections -fdata-sections -ffreestanding -fno-jump-tables -fno-tree-scev-cprop -fno-split-wide-types -mmcu=atmega2560 -DF_CPU=8000000L  -DMMC_CS=PB0 -DMMC_PORT=PORTB -DMMC_DDR=DDRB  -Wl,--section-start=.text=0x1F000 -Wl,--relax -nostartfiles -Wl,-gc-sections board-ArduinoMegaPro.c mmc_fat.c stk500v1.c prog_flash.c -o build/2boots-ArduinoMegaPro-atmega2560-8000000L-PB0.elf
board-ArduinoMegaPro.c: In function 'main':
board-ArduinoMegaPro.c:62:45: warning: function with qualified void return type called [enabled by default]
stk500v1.c: In function 'setup_uart':
stk500v1.c:129:2: error: 'UBRRL' undeclared (first use in this function)
stk500v1.c:129:2: note: each undeclared identifier is reported only once for each function it appears in
stk500v1.c:130:2: error: 'UBRRH' undeclared (first use in this function)
stk500v1.c:131:2: error: 'UCSRA' undeclared (first use in this function)
stk500v1.c:132:2: error: 'UCSRC' undeclared (first use in this function)
stk500v1.c:133:2: error: 'UCSRB' undeclared (first use in this function)
stk500v1.c:133:10: error: 'TXEN' undeclared (first use in this function)
stk500v1.c:133:20: error: 'RXEN' undeclared (first use in this function)
stk500v1.c: In function 'putch':
stk500v1.c:155:11: error: 'UCSRA' undeclared (first use in this function)
stk500v1.c:155:19: error: 'UDRE' undeclared (first use in this function)
stk500v1.c:156:2: error: 'UDR' undeclared (first use in this function)
stk500v1.c: In function 'getch':
stk500v1.c:192:10: error: 'UCSRA' undeclared (first use in this function)
stk500v1.c:192:18: error: 'RXC' undeclared (first use in this function)
stk500v1.c:201:9: error: 'UDR' undeclared (first use in this function)
stk500v1.c: In function 'handle_addr':
stk500v1.c:236:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
stk500v1.c: In function 'getch':
stk500v1.c:203:1: warning: control reaches end of non-void function [-Wreturn-type]
make: *** [2boots-atmega2560-8000000L-PB0-board-ArduinoMegaPro.hex] Error 1

spatula

Hi,
register names and bit names have a numeric value inside, e.g. UCSR0A, UDRE0, where 0 is the USART number. On the Mega you have four of them, numbered 0 to 3.

mrjonny2

Ahhhh
That would make sense, thank you.  I decided to drop support for serial which has made life a little easier.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy