Pages: [1]   Go Down
Author Topic: math or library for converting commands into bitmap array  (Read 277 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 37
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi, I'm using a arduino and high speed adc for an oscilloscope. Problem is high speed printing. I can not use a parallel interface to the display as I'm using majority of all the other pins already. I currently use a spark fun GLCD controller. I also just bought some Digole GLCD controllers with the same issues. I used the Digole display controller with a 400 kHz i2c bus which I thought would help but did not. The problem now is the display controller and its abilities.

I can print a whole image faster then I can togglepixel / drawline through a scan cycle.Is there any code or method for creating a Bitmap array by using commands like (drawline, toggle pixel) or simple math?
Logged

Montreal
Offline Offline
Faraday Member
**
Karma: 27
Posts: 2564
Per aspera ad astra.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

http://playground.arduino.cc/Code/GLCDks0108
Logged

Pages: [1]   Go Up
Jump to: