Pages: 1 [2]   Go Down
Author Topic: Atmega328p error burning bootloader  (Read 1528 times)
0 Members and 1 Guest are viewing this topic.
Colorado
Offline Offline
Newbie
*
Karma: 0
Posts: 10
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

ok, when I removed the cap on reset, the IDE did not fail when burning the bootloader.(verbose output in Arduino-output-bootload.txt)
I then tried to upload blink and got "avrdude: stk500_getsync(): not in sync: resp=0x00".(verbose output in Arduino-output-upload.txt)

* Arduino-output-bootload.txt (22.92 KB - downloaded 12 times.)
* Arduino-output-upload.txt (17.3 KB - downloaded 13 times.)
Logged

Wahiawa, Hawaii
Offline Offline
God Member
*****
Karma: 29
Posts: 600
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

For uploading the Blink or any sketch, if you are using your USBtiny programer then you need to use "Upload Using Programmer" from the File menu.  Just selecting "Upload" will attempt to upload using the bootloader, which requires a USB to serial adapter and the auto-reset circuit.

Logged

Colorado
Offline Offline
Newbie
*
Karma: 0
Posts: 10
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

YAY, Blink.
It was the cap on reset and having to select upload with programer.
Thanks all of you for your help!
Logged

Pages: 1 [2]   Go Up
Jump to: