Go Down

Topic: Arduino LCD via I2C (PCF8574AP) (Read 341 times) previous topic - next topic


Hi guys,,, I found the problem on HD44780 (16x2) display via I2C with a PCF8574AP.
when I uploaded the example sketch, there are a few problems. The first line is filled with black boxes.
I'm not able to print text on the display.

is there any solution ??

I use this code

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x38,16,2);  // set the LCD address to 0x20 for a 16 chars and 2 line display

void setup()
  lcd.init();                      // initialize the lcd

  // Print a message to the LCD.
  lcd.print("Hello, world!");

void loop()

I use this schematic

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131