Go Down

Topic: USB host shield (Read 433 times) previous topic - next topic

Hazem

Hello every body
can somebody help me how to use the board_qc sketch ?

thank you for help

Hazem

please help me friends

CrossRoads

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

BillHo

#3
May 05, 2013, 05:07 am Last Edit: May 05, 2013, 05:19 am by BillHo Reason: 1
Do not cross post!

https://github.com/felis/USB_Host_Shield_2.0/blob/master/examples/board_qc/board_qc.ino
The board_qc sample in the Host Shield 2.0 library is use to test your board.  It out on serial with 115200 baud.

What device are you connected to this USB host shield?

Hazem

thank you Bill, befor i gor serial messages as scratches, but the problem is solved after i change the speed to 115200 baud
thank you for help

Hazem

bill , can you guide me to a good website for good projects to connect Arduino with Android Mobile phone?

Go Up