Pages: [1]   Go Down
Author Topic: 0.96" i2c Oled  (Read 1325 times)
0 Members and 1 Guest are viewing this topic.
Nova Scotia
Offline Offline
Full Member
***
Karma: 4
Posts: 191
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I've purchased several of the 0.96" i2c OLED displays off ebay and noticed the price would creep up every few weeks so I tried making my own 3.3V version. To my surprise it worked one the first go. The price for the bare glass off ebay is around $5 and I will sell an assembled and tested design for $9. If you are interested in making your own the schematic and gerber files are attached. If you would like an assembled and tested one then you can grab it at: https://www.tindie.com/products/miker/096-oled-i2c-display/
I have a new 3.3V/5.0V design in the works. It uses a preferred i2c level converter instead of mosfets like i've seen in other designs. Feel free to send me a message if you would like more info. The schematic and board is already done. It just needs to come from manufacturing and be tested.




Mike

* OLED_PCB_Rev1.pdf (40.08 KB - downloaded 55 times.)
* OLED_PCB_R1.zip (8.14 KB - downloaded 42 times.)
Logged

Pages: [1]   Go Up
Jump to: