Go Down

Topic: HIH-4030 (Read 330 times) previous topic - next topic

Jun 10, 2013, 04:54 pm Last Edit: Jun 10, 2013, 07:47 pm by MNGooner76 Reason: 1
Hi,

Sorry if I'm asking stupid questions, but I don't understand. I could use some help.

I'm doing a project where I am reporting the relative humidity and then sending that value to Xively data logging website. https://xively.com. I'm able to successfully connect to the website and send it data. However the data that I'm sending to the site is the raw data from the sensor. A raw value may look like anywhere from 375 to 650. I want to send a value like 47% relative humidity. In the code its calculating the voltage and relative humidity and displaying in the serial monitor, it's just not being sent to the website, which is what I want. How do I send to Xively the relative humidty value?

The serial monitor displays the following text.

Starting single datastream upload to Xively...
Read sensor value 635.00

Uncalibrated: Sensor Voltage = 2.59V Relative Humidity = 52.73%
Calibrated: Uploading to Xivelyxivelyclient.put returned200


Thanks,

Chris


#1
Jun 10, 2013, 09:28 pm Last Edit: Jun 10, 2013, 09:36 pm by MNGooner76 Reason: 1
Hi,

Sorry if I'm asking stupid questions, but I don't understand. I could use some help.

I'm doing a project where I am reporting the relative humidity and then sending that value to Xively data logging website. https://xively.com. I'm able to successfully connect to the website and send it data. However the data that I'm sending to the site is the raw data from the sensor. A raw value may look like anywhere from 375 to 650. I want to send a value like 47% relative humidity. In the code its calculating the voltage and relative humidity and displaying in the serial monitor, it's just not being sent to the website, which is what I want. How do I send to Xively the relative humidty value?
The serial monitor displays the following text.

Starting single datastream upload to Xively...
Read sensor value 635.00

Uncalibrated: Sensor Voltage = 2.59V Relative Humidity = 52.73%
Calibrated: Uploading to Xivelyxivelyclient.put returned200


Thanks,

Chris


pylon

You have to provide links to the non-standard libraries you used:

Code: [Select]
#include <HttpClient.h>
#include <Xively.h>
#include <HIH4030.h>

PaulS

Quote
In the code its calculating the voltage and relative humidity and displaying in the serial monitor

Do you recognize the code that is doing this?

Perhaps this bit:
Code: [Select]
void printSensorData(HIH4030 hygrometer) {
  Serial.print("Sensor Voltage = ");
  Serial.print(hygrometer.vout());
  Serial.print("V  Relative Humidity = ");
  Serial.print(hygrometer.getSensorRH());
  Serial.println("%");
}


Store the values somewhere, and print the stored values. Then, you can use those same values when sending the data to the server.

Quote
How do I send to Xively the relative humidty value?

"How do I use a library that no one has heard of to do what I want?"

Perhaps you start with posting a link to the library. Just a thought.

AWOL

Another merged thread.

DO NOT CROSS-POST - IT WASTES TIME.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Go Up