Pages: [1]   Go Down
Author Topic: PIC 16F627A Programmer  (Read 763 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi guys,

I've recently been working on using an Arduino to program a PIC 16F627A chip. Sorrane's project should be able to do this, but I couldn't get it working for whatever reason (I suspect slightly different timings in the programming spec due to me using the A version of the chip), so I wrote this instead (based on Sorrane's code).

The basis is an Arduino sketch providing  a serial interface for programming the chip, with a python script to program .asm/.hex files onto the chip. It should work out of the box on linux, but will probably need a little tweaking to get the python serial port stuff working with Windows/OSX.

The circuit required is

See the GitHub page for the sketch (I couldn't post it directly here without exceeding the character limit) and python script and more in-depth instructions. Alternatively, both files are attached with a readme.

Hopefully this is of some help to someone

* (1.6 KB - downloaded 49 times.)
* programmer.ino (8.32 KB - downloaded 47 times.)
* (2.37 KB - downloaded 48 times.)

Pages: [1]   Go Up
Jump to: