1.Can i use the touch screen LCD module directly with mega 2560 without the LCD Shield?Will Touch,LCD Screen and SD card all will work fine? NO2.Can i use the Library that arduino provided in arduino 1.0.3? Possibly but don't count on it, get the library from your seller3.Can you provide me some tutorials including demo codes with exactly this LCD? Comes with the file from the sender or find another seller with the same lcd and download that folder4.Can you tell me the limitations and features of this LCD? Because i want to be cautious to use this. Your limited to what your library can do, unless you can make further functions for the library5.Can i play video or Flash or any animation using mega 2560 and this TFT Touch Screen LCD? No, not at all, however if you do want to try, go ahead, I can tell you that it will be very slow and choppy.
1.Can i use the touch screen LCD module directly with mega 2560 without the LCD Shield?Will Touch,LCD Screen and SD card all will work fine? yes by wires, but I don't know how. I advise you buy from websitehttp://www.sainsmart.com/home-page-view/sainsmart-mega2560-board-3-5-tft-lcd-module-display-shield-kit-for-atmel-atmega-avr-16au-atmega8u2.html[ 2.Can i use the Library that arduino provided in arduino 1.0.3? 3.Can you provide me some tutorials including demo codes with exactly this LCD? ]look the website :http://www.sainsmart.com/home-page-view/sainsmart-mega2560-board-3-5-tft-lcd-module-display-shield-kit-for-atmel-atmega-avr-16au-atmega8u2.html5.Can i play video or Flash or any animation using mega 2560 and this TFT Touch Screen LCD?you can upload images to tft lcd only.Thanks in Advance.
You need to get the correct library from the seller and you need to use the expansion shield.
yes by wires, but I don't know how. I advise you buy from websitehttp://www.sainsmart.com/home-page-view/sainsmart-mega2560-board-3-5-tft-lcd-module-display-shield-kit-for-atmel-atmega-avr-16au-atmega8u2.htmllook the website :http://www.sainsmart.com/home-page-view/sainsmart-mega2560-board-3-5-tft-lcd-module-display-shield-kit-for-atmel-atmega-avr-16au-atmega8u2.htmlyou can upload images to tft lcd only.
I puzzled some hours with exactly the same hardware setup and made a quick & dirty, but successfully test script, combining LCD, Touch and SD Card Features. While googeling I read some hints about wrong Hardware pin mistakes made by the SainSmart V1 Display boards.I can NOT agree These discusions.My board is a SainSmart V1.0 and everything works properly with maximum SPI Speed. The hardes part was to get the SD Card filenames on my TFT Display. (not possible with the sd.h library.)But with the <tinyFAT.h> it works!
For real-time display, a faster processor might be needed, like the Due. I have been using the ColdTears Electronics CTE32HR, CTE35, CTE40, CTE50, and CTE70 with the Due. CTE has one shield for the Due, and another for the Mega.I have modified the UTFT, UTFT_CTE, and UTouch libraries to support them all, and my Sketch, for the Due, supports various touch buttons, etc. Cheers, Gary