Go Down

Topic: A 6 DOF robotic arm as a CNC machine? (Read 2267 times) previous topic - next topic



I have always dreamed of cheap 5 axle CNC machining mill. It should be possible to CNC-machine a car with that or similar complex object like a human head.

Once I am good to make excellent modelings with Rhinoceros I would like realize these modelings too in real life.

But is there any sense to buy a low cost 6 DOF robotic arm from ebay and use it as a tool like this:


Is it really difficult to program arduino make whatever form from .stl files in order to CNC machine them with this kind of robotic arm?

Maybe the table where the machinable object is fixed could have such an function that it could rotate with a servo. But I think that in theory a robotic arm with a

table like this should be able to machine whatever form.

Please tell me your opinions of a plan like this. Many thanks in advance.


I found a machining open source software like this for Linux...


It probably helps in this issue.


But is there any sense to buy a low cost 6 DOF robotic arm from ebay and use it as a tool like this:

Google forum search: Use Google Search box in upper right side of this page.
Why I like my 2005 Rio Yellow Honda S2000  https://www.youtube.com/watch?v=pWjMvrkUqX0


Not enough:


with that price point.

You could probably do it for around ~$15,000+, looking at the prices of appropriate DOF welding robots on ebay.
Windows serial port monitor: Tellurium | Arduino serial port debugging library: DBG | Cusom LCD char generator | Technical questions will only be answered in forum threads

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131