Pages: [1]   Go Down
Author Topic: Arduino uno single sided PCB  (Read 1522 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hey guyz i wan to make single sided PcB for arduino uno... i have searched it on google and i found only this

http://arduino.cc/en/Main/ArduinoBoardSerialSingleSided3

but this is a serial programmer... i want usb programmer...
does anybody here has USB version of this single sided board??
Logged

Sweden
Offline Offline
Sr. Member
****
Karma: 11
Posts: 253
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hey guyz i wan to make single sided PcB for arduino uno... i have searched it on google and i found only this

http://arduino.cc/en/Main/ArduinoBoardSerialSingleSided3

but this is a serial programmer... i want usb programmer...
does anybody here has USB version of this single sided board??


Depends on what you want.. Do you want the USB on-board or as an external device?? In-case of external then here is a link: http://vonkonow.com/wordpress/2012/10/nanino-the-diy-friendly-arduino/

In-case you want an internal, you got to specify the USB chip.. Do you want a FTDI, or atmega8u2/16u2 like the uno???
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Yes, i want on board USB like arduino uno. and also atmega8u2/atmega16u2.
In short i want to replicate arduino uno board,on single sided pcb using THT(Through hole technology).
Logged

Sweden
Offline Offline
Sr. Member
****
Karma: 11
Posts: 253
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I'm sorry to say this bro, but, there isn't any DIP/through hole package for the atmega8u2/16u2.. And I really don't know of any chip in DIP package that does USB Serial conversion... You can maybe make something like this guy: http://forum.arduino.cc/index.php?topic=24460.0

He's uses an atmega8 as the USB to serial chip..

//Basel
Logged

Czech Republic
Offline Offline
Sr. Member
****
Karma: 3
Posts: 309
Absolute Beginner, yet.
Newbie in Arduino
since May 2013
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

And what about this? (I do not know anything about it, I found it by accident)

http://vonkonow.com/wordpress/2012/10/nanino-the-diy-friendly-arduino/
Logged

Arduino Uno R3, Arduino Mega 2560 R3, Ethermega (R3), and some Ethernet Shields (R3), Chronodots, TMP36 sensors, DS18B20 sensors, LCDs/TFTs, RS232C to learn and play...

Sweden
Offline Offline
Sr. Member
****
Karma: 11
Posts: 253
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

And what about this? (I do not know anything about it, I found it by accident)

http://vonkonow.com/wordpress/2012/10/nanino-the-diy-friendly-arduino/

This needs an external USB to Serial adapter in-order to program it.. So no USB on-board...

//Basel
Logged

Denmark
Offline Offline
Edison Member
*
Karma: 35
Posts: 1029
Happy Hobbyist
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Take a look at the Metaboard:


https://metalab.at/wiki/Metaboard
Logged

Atlanta, USA
Offline Offline
Edison Member
*
Karma: 33
Posts: 1424
AKA: Ray Burne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Edit: found answer:
Quote
Metaboard is best used with USBaspLoader
And USBaspLoader is V-USB http://www.obdev.at/products/vusb/usbasploader.html

Quote
@Erni,

Interesting.  Have you tried this?

I have posted many V-USB articles and have my own license, but the link appears to deviate from the V-USB Port, until it mentions RancidBacon's Arduino port which is a V-USB'ish library port.  Very confusing.  Guess I need to drop the zip and see what is happening behind the scenes.

Edit: more Metaboard w/328
Bootloader: https://sites.google.com/site/a52egv/metaboard
http://forum.arduino.cc/index.php?topic=92925.0

Ray
« Last Edit: August 31, 2013, 03:22:02 pm by mrburnette » Logged

Leeds, UK
Offline Offline
Edison Member
*
Karma: 71
Posts: 1641
Once the magic blue smoke is released, it won't go back in!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

If you want a through-hole USB-Serial chip, the only one I could come up with when I looked in the past is this Microcontroller:
http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en533924

Trouble is you have to be able to program PIC devices to get it to work. The firmware for the PIC along with a windows driver can be found here and a schematic of how it can be wired up here (Eagle 6 schematic which includes the PIC18F14K50 as a USB-serial device).
Logged

~Tom~

Global Moderator
Boston area, metrowest
Offline Offline
Brattain Member
*****
Karma: 437
Posts: 23718
Author of "Arduino for Teens". Available for Design & Build services. Now with Unlimited Eagle board sizes!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I like this module for thru hole USB/Serial.
http://www.mouser.com/ProductDetail/mikroElektronika/MIKROE-483/?qs=%2fha2pyFadugsEwyLV5fFyIWdPbushEDhRSvnBE0ODG8%3d
Here it is in a socket, so it can be removed after serial downloading.
http://www.crossroadsfencing.com/BobuinoRev17/
Logged

Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Denmark
Offline Offline
Edison Member
*
Karma: 35
Posts: 1029
Happy Hobbyist
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
If you want a through-hole USB-Serial chip, the only one I could come up with when I looked in the past is this Microcontroller:
http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en533924


Another option is the PIC32MX250F128B

You can buy it with preinstalled USB-bootloader for $ 3.75
http://www.microchipdirect.com/ProductSearch.aspx?Keywords=TCHIP-USB-MX250F128B

It is very easy to get going, just plug the USB-cable to the chip (almost  smiley-lol )

http://chipkit.net/chipkit-bb32/

And you can use MPIDE to program it, very Arduino-like

MPIDE is a fork of the Arduino IDE

I have put it on a stripboard, the black wire on the left is the USB-cable

« Last Edit: September 08, 2013, 06:47:19 am by Erni » Logged

Pages: [1]   Go Up
Jump to: