Go Down

Topic: Samsung AC remote (Read 592 times) previous topic - next topic

shankarkrupa

Hi,

I am trying to switch on/off a Samsung AC through Arduino. I looked at Ken Shirriff's library (not yet used it) but could not find anything specific to Samsung.

Please advise how I can proceed with controlling the Samsung air conditioner. Is there a library available for controlling Samsung air conditioners? Is there a separate IR configuration I have to use for Samsung - like a specific IR light, a pair of IRs, etc.

zoomkat

Does the remote have separate on/off buttons? You can jumper a remote button with a transistor.
Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   8)

shankarkrupa


Does the remote have separate on/off buttons? You can jumper a remote button with a transistor.


No, there is only one button to do both. To jumper the button with transistor, as in opening the remote and hooking the circuit directly with Arduino? Thought of reserving this as a last option as I have not done anything like this before  :(. I will give this a try if this would be the only possible solution.

vrooms23

http://arduino-info.wikispaces.com/IR-RemoteControl

shankarkrupa


http://arduino-info.wikispaces.com/IR-RemoteControl


Is that not a generic one (Sony protocol?)? The Samsung remote I have has two IR LEDs, so trying to find out if there is a library/config setup example that I can try to go in the right direction.

Krupa

Go Up