Go Down

Topic: Home automation in M2M technology (Read 2211 times) previous topic - next topic

ritsindia

Hello friends ,
I am doing my project in Home automation.I wanna control AC, if temperature increases beyond certain limit then it should get ON/OFF. Till now i have connected Arduino duemilanove board with temperature and humidity sensor and with relay. If temperature goes beyond then relay's LED gets ON. I want your guidance regarding what else i can do and how i can make it as real time.
Do give your suggestions...
Thank you!

veseo

Hi,

you may have a look at Souliss Library, is a framework that runs on Arduino and gives all the code to automate your devices.

Let me know if you find it useful.

Regards,
Dario.
Souliss - Open-source Distributed Home Automation with Arduino and Android

http://www.souliss.net
Follow at @soulissteam

@veseotech

veseo


Hi,

you may have a look at Souliss Library, is a framework that runs on Arduino and gives all the code to automate your devices.

Let me know if you find it useful.

Regards,
Dario.
Souliss - Open-source Distributed Home Automation with Arduino and Android

http://www.souliss.net
Follow at @soulissteam

@veseotech

ritsindia

I'll read about it  and  I'll let u know.

ritsindia

Hi,
How souliss is useful to me i m unable to understand .
Can you just elaborate about it or do u have any other idea?

veseo

Is a library for home automation, in the website and the wiki there are all the details.

Dario.
Souliss - Open-source Distributed Home Automation with Arduino and Android

http://www.souliss.net
Follow at @soulissteam

@veseotech

Go Up