Go Down

Topic: bluetooth module (Read 4464 times) previous topic - next topic

shuzon

http://translate.googleusercontent.com/translate_c?depth=1&hl=en&prev=/search%3Fq%3Dcsr.com%2BBC31314A13U%26client%3Dfirefox-a%26hs%3D9tz%26rls%3Dorg.mozilla:en-US:official&rurl=translate.google.com.bd&sl=zh-CN&u=http://detail.tmall.com/item.htm%3Fid%3D22202907942%26%26tbpm%3D3&usg=ALkJrhiG9E0ljOpCMqkylnhroDUXsWdhxg


has anyone worked with this module... i

shuzon

this is the picture of the module

Zapro

Unless it states somewhere, that it's already loaded with a Firmware that offers a Serial port with AT-commands, like the other offerings, chances is, you will only get a raw module, where you need to program a special firmware into the module (requires a special dongle, and software package that costs a fortune) ...

A module like that is for a vendor that is able to write his own firmware image for the chipset.

// Per.

Zapro

It appears that the chip on the module is a ROM-based unit, meaning that the firmware inside, cannot be changed by a reflash. The BC31314-part is a PCM only device - meaning it's meant for streaming of PCM audio (Bluetooth Headset/Handsfree)
If you pair up this module with a I2S Codec-chip, you can make a Headset - but you still need access to the documentation from CSR and the developer of the small PCB to make anything of it.

Useless.

// Per.

shuzon

thank you for sharing your experties with us !  :D

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy