Pages: [1]   Go Down
Author Topic: Idea for micro, add USB pins  (Read 636 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Dear Arduino developers.
Thanks for the wonderful products.
We have been using Arduino for teaching microprocessor for more than 6 years,
using the Duemilanove and the Uno series.
Now, we are going to purchase a new batch, which is Leonardo.
However, one thing bothers us ... the USB connector is so small.
We afraid that the students will easily break it.

So we are looking at the Micro series.
We intend to put it on a larger shield, with the big USB connector there,
but alas, it is not possible, because the USB's D+ and D-
are not available in the pins.
We consulted the schematic, pin no 7 and 8 are still unconnected.
May we ask an improved version, with D+ and D- on those pins ?

Thank you very much.
« Last Edit: December 18, 2013, 10:41:20 pm by kocil » Logged

Global Moderator
Offline Offline
Brattain Member
*****
Karma: 504
Posts: 19095
Lua rocks!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I just want to warn you, the Leonardo and similar (Atmega32U4-based) devices can be a pain to program. Because the serial interface, and the processor, are on the same chip (unlike the Uno, Duemilanove etc.) you sometimes have to try two or three times to get code to upload.

Yesterday, for example I had to reboot my Mac, when it just refused to upload a sketch.

If you want the USB interface (eg. to emulate keyboards, mice etc.) then you need to use them (the 32U4 boards), but otherwise I would stick with the older boards.
Logged


Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks for the warning.
Yeah, actually I prefer the older UNO one, because of the USB connector reason.
Your consideration just add another reason to stick with UNO.
But ... it will be discontinued and replaced by Leonardo, won't it ?
Logged

Global Moderator
Offline Offline
Brattain Member
*****
Karma: 504
Posts: 19095
Lua rocks!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I hope not. It's a totally different processor.
Logged


Manchester (England England)
Offline Offline
Brattain Member
*****
Karma: 637
Posts: 34580
Solder is electric glue
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
it will be discontinued and replaced by Leonardo, won't it
No way.
Logged

Global Moderator
Offline Offline
Brattain Member
*****
Karma: 504
Posts: 19095
Lua rocks!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Besides which, there are plenty of Uno lookalikes around (to say nothing of illegal copies). As one example:



That cost me around $15. I had to solder it together but it wasn't particularly onerous. A good starting job if you are teaching microprocessors and electronics.
Logged


Pages: [1]   Go Up
Jump to: