Mega with ITEAD 3.2 TFT LCD TOUCH SHIELD

Hi
Ive been trying to get this screen to work for the past few days, but just can't get the hang of it.

It works perfectly when I connect it directly on the Mega,
https://drive.google.com/file/d/0BxqStVFXsIWkdXFHWUExWjJWajZHNFJQb3FtSno2NkwzMXFV/edit?usp=sharing
but when I try to connect it using cables, it just doesn't want to work....
https://drive.google.com/file/d/0BxqStVFXsIWkYTM5YUFSTmtZdVNXSUhvTkdCc28wSUFoNndV/edit?usp=sharing
Please help!!!

the photo links aren't working . Can you just save the photos to your system and upload them as
attachments ?

Sorry, im new to this forum...

photo 1.JPG

Need a photo of the BACK of TFT showing the pins and a wiring list showing
how you connected it because I can't get that info from the photos. . You get an "A"
for effort for taking the photos but the photos we need are STRIGHT ON SHOTS
of the board taken directly in front (or above if it is laying flat) that we can use
to zoom in on the pins & connectors to see where the wires go. It is good to know
the display works when plugged into the Mega. That's huge. That means somehow
you are not connecting to the same pins, I would think.

Are you at 3500 ft. in the photo ? (attached)

FredPot.jpg

Is this any help (see attached)

3.2-tft-lcd-touch-shield-shd032.pdf (451 KB)

It's working, just re-did all the wiring.....and its fixed.... :~ oops

And I thing that was taken just before opening, so i think about 3500ft...

That's what I thought . It looks like the same altitude as my skydiving photo. The sensor triggered chute open at 3500 ft.