Go Down

Topic: Verification error; content mismatch (Read 410 times) previous topic - next topic

Cono

Hey!
I have an arduino uno R3 clone called Funduino, worked fine for couple months but now i get this error:


avrdude: verification error, first mismatch at byte 0x0000
     0x0c != 0x62
avrdude: verification error; content mismatch


The on green led and the led on pin 13 are constantly on.
Anyone knows anything about this?
Tried upgrading USB Firmware with FLIP like this http://www.youtube.com/watch?v=fSXZMVdO5Sg
but the error remains
Thanks!

Grumpy_Mike

It means that the computer has told the boot loader to write a specific byte value and when it reads it back it is not the same. This means the flash memory in the processor chip is now bad.
You need to replace the processor chip.

Cono

#2
Feb 07, 2014, 03:05 pm Last Edit: Feb 07, 2014, 03:11 pm by Cono Reason: 1
You mean change the ATMegaU16 ATMega328p-pu entirely?
Flashing the bootloader won't fix the problem?
Thanks!

Grumpy_Mike

Quote
You mean change the ATMega328p-pu entirely?

Yes well you can't change part of it can you.

Quote
Flashing the bootloader won't fix the problem?

Well you could try, it would cost you nothing, but it is unlikely to be the problem.

Cono

Can this be done with another Arduino?

Grumpy_Mike


Cono


Grumpy_Mike

Well not exactly. There are parts there you don't need and the 328 chip has not got a boot loader in. What you exactly need is something like this:-
https://www.sparkfun.com/products/10524

Go Up