Pages: [1]   Go Down
Author Topic: ethernet shield enc28j60.  (Read 757 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Jr. Member
**
Karma: 0
Posts: 78
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

  :'(Hi I have this Shiel and
I said it was compatible with Arduino but not connecting
http://cgi.ebay.es/ws/eBayISAPI.dll?
ViewItem & item = 260688971131 & ssPageName = STRK: M. ..
my shield pins are marked well and I think so:
"sck" which means "sck" link pin13
"yes" which means "mosi" link (I think) pin11
"so" which means "commitment" of the link (I think) pin12
"cs" that deductions will be the "ss". (someone could confirm) pin10
and me on these pins
WQL = not for serving
int = idem
clkout = idem
reset = be for resetting but not how to use
Feed = 3.3V
grn = feeding

I've been mulling over several days on google and sending emails to the Chinese or
case, I do not throw it no longer do.
if anyone can tell me how to connect would be grateful .... and so to
follow
thanks

not think I'm on the right path?
and thanks
Logged

0
Offline Offline
Jr. Member
**
Karma: 0
Posts: 78
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

help help
Logged

0
Offline Offline
Tesla Member
***
Karma: 141
Posts: 9470
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Many people have problems getting the enc28j60 type ethernet shield working. You can search the forum for your shield for past post concerning issues. For less trouble, spend the extra $$$ and get the below W5100 shield.

http://cgi.ebay.com/Arduino-Ethernet-Shield-Based-Wiznet-W5100-Ethernet-/120666434238?pt=LH_DefaultDomain_0&hash=item1c1847aabe
Logged

Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   smiley-cool

0
Offline Offline
Jr. Member
**
Karma: 0
Posts: 78
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I think the ultimate solution is to buy a new one, I like this
work.
already connected but this happens.
if the ip is 192.168.1.15 and make a ping
I said that the timeout
and if the change by
192.168.0.15
send and receive but I get an error destination unreachable host.
Logged

Offline Offline
Full Member
***
Karma: 0
Posts: 125
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ethernet enc28j60 type requires 'etherShield' library or another set of code I saw around here somewhere.  search for 'enc28j60'




Logged

0
Offline Offline
Jr. Member
**
Karma: 0
Posts: 78
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

before posting and find it
  and I have not been successful.
http://www.nuelectronics.com/estore/index.php?main_page=project_eth
help help smiley-sad
Logged

Pages: [1]   Go Up
Jump to: