Go Down

Topic: Adafruit CC33000 Library WebClient Local PHP (Read 517 times) previous topic - next topic

phinsil6

Hello,
I'm attempting to retrieve some phps from my new Adafruit CC3000 Library using the Webclient example and it works fine for all "internet" sites but I can't seem to get it to work for my local server.

Here is my Arduino Code:
Code: [Select]

#include <Adafruit_CC3000.h>
#include <ccspi.h>
#include <SPI.h>
#include <string.h>
#include "utility/debug.h"

// These are the interrupt and control pins
#define ADAFRUIT_CC3000_IRQ   3  // MUST be an interrupt pin!
// These can be any two pins
#define ADAFRUIT_CC3000_VBAT  5
#define ADAFRUIT_CC3000_CS    10
Adafruit_CC3000 cc3000 = Adafruit_CC3000(ADAFRUIT_CC3000_CS, ADAFRUIT_CC3000_IRQ, ADAFRUIT_CC3000_VBAT,SPI_CLOCK_DIVIDER);

#define WLAN_SSID       "MikroTik"
#define WLAN_PASS       "7409721385"
// Security can be WLAN_SEC_UNSEC, WLAN_SEC_WEP, WLAN_SEC_WPA or WLAN_SEC_WPA2
#define WLAN_SECURITY   WLAN_SEC_WPA2

//#define WEBSITE "http://192.168.88.240"
//#define WEBPAGE "/Home_Automation/checkStatus.php?DeviceCount=3&Type=Toggles&Device0=HVAC_Fan&Device1=HVAC_Ac&Device2=HVAC_Heat"

#define WEBSITE      "192.168.88.240"
#define WEBPAGE      "/home_automation/test.php"

#define IDLE_TIMEOUT_MS  3000      // Amount of time to wait (in milliseconds) with no data
                                   // received before closing the connection.  If you know the server
                                   // you're accessing is quick to respond, you can reduce this value.
uint32_t ip = cc3000.IP2U32(192, 168, 88, 240);

void setup()
{
  Serial.begin(57600);
  CC3000_setup();
  WebRequest();
}

void loop()
{}

void CC3000_setup()
{
  Serial.println(F("Hello, CC3000!\n"));

  displayDriverMode();
  Serial.print("Free RAM: "); Serial.println(getFreeRam(), DEC);
 
  /* Initialise the module */
  Serial.println(F("\nInitialising the CC3000 ..."));
  if (!cc3000.begin())
  {
    Serial.println(F("Unable to initialise the CC3000! Check your wiring?"));
    while(1);
  }
 
  uint16_t firmware = checkFirmwareVersion();
  if ((firmware != 0x113) && (firmware != 0x118)) {
    Serial.println(F("Wrong firmware version!"));
    for(;;);
  }
 
  displayMACAddress();
 
  /* Delete any old connection data on the module */
  Serial.println(F("\nDeleting old connection profiles"));
  if (!cc3000.deleteProfiles()) {
    Serial.println(F("Failed!"));
    while(1);
  }

  /* Attempt to connect to an access point */
  char *ssid = WLAN_SSID;             /* Max 32 chars */
  Serial.print(F("\nAttempting to connect to ")); Serial.println(ssid);
 
  /* NOTE: Secure connections are not available in 'Tiny' mode! */
  if (!cc3000.connectToAP(WLAN_SSID, WLAN_PASS, WLAN_SECURITY)) {
    Serial.println(F("Failed!"));
    while(1);
  }
   
  Serial.println(F("Connected!"));
 
  /* Wait for DHCP to complete */
  Serial.println(F("Request DHCP"));
  while (!cc3000.checkDHCP())
  {
    delay(100); // ToDo: Insert a DHCP timeout!
  } 

  /* Display the IP address DNS, Gateway, etc. */ 
  while (! displayConnectionDetails()) {
    delay(1000);
  }
}


/**************************************************************************/
/*!
    @brief  Displays the driver mode (tiny of normal), and the buffer
            size if tiny mode is not being used

    @note   The buffer size and driver mode are defined in cc3000_common.h
*/
/**************************************************************************/
void displayDriverMode(void)
{
  #ifdef CC3000_TINY_DRIVER
    Serial.println(F("CC3000 is configure in 'Tiny' mode"));
  #else
    Serial.print(F("RX Buffer : "));
    Serial.print(CC3000_RX_BUFFER_SIZE);
    Serial.println(F(" bytes"));
    Serial.print(F("TX Buffer : "));
    Serial.print(CC3000_TX_BUFFER_SIZE);
    Serial.println(F(" bytes"));
  #endif
}

/**************************************************************************/
/*!
    @brief  Tries to read the CC3000's internal firmware patch ID
*/
/**************************************************************************/
uint16_t checkFirmwareVersion(void)
{
  uint8_t major, minor;
  uint16_t version;
 
#ifndef CC3000_TINY_DRIVER 
  if(!cc3000.getFirmwareVersion(&major, &minor))
  {
    Serial.println(F("Unable to retrieve the firmware version!\r\n"));
    version = 0;
  }
  else
  {
    Serial.print(F("Firmware V. : "));
    Serial.print(major); Serial.print(F(".")); Serial.println(minor);
    version = major; version <<= 8; version |= minor;
  }
#endif
  return version;
}

/**************************************************************************/
/*!
    @brief  Tries to read the 6-byte MAC address of the CC3000 module
*/
/**************************************************************************/
void displayMACAddress(void)
{
  uint8_t macAddress[6];
 
  if(!cc3000.getMacAddress(macAddress))
  {
    Serial.println(F("Unable to retrieve MAC Address!\r\n"));
  }
  else
  {
    Serial.print(F("MAC Address : "));
    cc3000.printHex((byte*)&macAddress, 6);
  }
}


/**************************************************************************/
/*!
    @brief  Tries to read the IP address and other connection details
*/
/**************************************************************************/
bool displayConnectionDetails(void)
{
  uint32_t ipAddress, netmask, gateway, dhcpserv, dnsserv;
 
  if(!cc3000.getIPAddress(&ipAddress, &netmask, &gateway, &dhcpserv, &dnsserv))
  {
    Serial.println(F("Unable to retrieve the IP Address!\r\n"));
    return false;
  }
  else
  {
    Serial.print(F("\nIP Addr: ")); cc3000.printIPdotsRev(ipAddress);
    Serial.print(F("\nNetmask: ")); cc3000.printIPdotsRev(netmask);
    Serial.print(F("\nGateway: ")); cc3000.printIPdotsRev(gateway);
    Serial.print(F("\nDHCPsrv: ")); cc3000.printIPdotsRev(dhcpserv);
    Serial.print(F("\nDNSserv: ")); cc3000.printIPdotsRev(dnsserv);
    Serial.println();
    return true;
  }
}

/**************************************************************************/
/*!
    @brief  Begins an SSID scan and prints out all the visible networks
*/
/**************************************************************************/

void listSSIDResults(void)
{
  uint8_t valid, rssi, sec, index;
  char ssidname[33];

  index = cc3000.startSSIDscan();

  Serial.print(F("Networks found: ")); Serial.println(index);
  Serial.println(F("================================================"));

  while (index) {
    index--;

    valid = cc3000.getNextSSID(&rssi, &sec, ssidname);
   
    Serial.print(F("SSID Name    : ")); Serial.print(ssidname);
    Serial.println();
    Serial.print(F("RSSI         : "));
    Serial.println(rssi);
    Serial.print(F("Security Mode: "));
    Serial.println(sec);
    Serial.println();
  }
  Serial.println(F("================================================"));

  cc3000.stopSSIDscan();
}

void WebRequest()
{
  Adafruit_CC3000_Client www = cc3000.connectTCP(ip, 80);
  if (www.connected()) {
    www.fastrprint(F("GET "));
    www.fastrprint(WEBPAGE);
    www.fastrprint(F(" HTTP/1.1\r\n"));
    www.fastrprint(F("Host: ")); www.fastrprint(WEBSITE); www.fastrprint(F("\r\n"));
    www.fastrprint(F("\r\n"));
    www.println();
  } else {
    Serial.println(F("Connection failed"));   
    return;
  }

  Serial.println(F("-------------------------------------"));
 
  /* Read data until either the connection is closed, or the idle timeout is reached. */
  unsigned long lastRead = millis();
  while (www.connected() && (millis() - lastRead < IDLE_TIMEOUT_MS)) {
    while (www.available()) {
      char c = www.read();
      Serial.print(c);
      lastRead = millis();
    }
  }
  www.close();
  Serial.println(F("-------------------------------------"));
 
  /* You need to make sure to clean up after yourself or the CC3000 can freak out */
  /* the next time your try to connect ... */
  Serial.println(F("\n\nDisconnecting"));
  cc3000.disconnect();
}


Code: [Select]
My HTML code:

My output is the following:
Code: [Select]

Hello, CC3000!

RX Buffer : 131 bytes
TX Buffer : 131 bytes
Free RAM: 6697

Initialising the CC3000 ...
Firmware V. : 1.24
MAC Address : 0x08 0x00 0x28 0x59 0x25 0x15

Deleting old connection profiles

Attempting to connect to MikroTik
Started AP/SSID scan




Connecting to MikroTik...Waiting to connect...Connected!
Request DHCP

IP Addr: 192.168.88.209
Netmask: 255.255.255.0
Gateway: 192.168.88.1
DHCPsrv: 192.168.88.1
DNSserv: 192.168.88.1


Connect to 192.168.88.240:80
-------------------------------------
-------------------------------------


Disconnecting



This is really annoying me and I can't figure out why it's not working, please help!! :D

zoomkat

The http:// is missing in one of the below.

Code: [Select]

//#define WEBSITE "http://192.168.88.240"
#define WEBSITE      "192.168.88.240"
Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   8)

phinsil6

good catch, but when i fixed that, same results

Go Up