Go Down

Topic: RX and TX leds (Read 1 time) previous topic - next topic

In the data sheet of the FT232RL, pin 23 it corresponds with CBUS0 and therefore TX LED. Nevertheless in the scheme of arduino NG, pin 23 is CBUS1 and LED RX.
Is this correct? Thank you.

jricher

Tx on PC -> Tx on FT232 -> Rx on AVR
Rx on PC -> Rx on FT232 -> TX on AVR

This way the PC sees the output of the microcontroller and the microcontroller sees the output of the PC.

Go Up