Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: USB connector wired backward in online CAD files?  (Read 351 times)
0 Members and 1 Guest are viewing this topic.
westfw
SF Bay Area (USA)
Online Online
Faraday Member
**
Karma: 78
Posts: 5454
Strongly opinionated, but not official!
View Profile
« on: May 12, 2007, 01:49:37 am »
 Bigger Bigger Smaller Smaller Reset Reset
I was laying out a serial arduino that would use a USB connector for power, and the
layout I came up with from "first principles" wasn't matching the layout of the USB
connector in the downloadable CAD files of the USB arduino  (arduino_usb_8.)
Further looking around shows that the online schematic for NG has the pins wired
exactly backwards from usb_8 (the ng schematics match my pinout understanding.)
Did you wind up with some odd USB connectors or what?
Logged

westfw
SF Bay Area (USA)
Online Online
Faraday Member
**
Karma: 78
Posts: 5454
Strongly opinionated, but not official!
View Profile
« Reply #1 on: November 05, 2007, 06:46:50 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Just as an update, this was wrong, but it's been fixed in the USB V2.1 cad files
Logged

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: