Go Down

Topic: Hardware serial problem (Read 1 time) previous topic - next topic

regatta

Hi, I want use HW serial to have a bidirectional comunication with a VMUSIC module, the RX is OK, but I can't send commands. I have verified the TX with a logic analizer and I have found that Arduino send a byte(1 or 3) a CR,LF and then the char in serial.print().

It is possible TX only what is in serial.print()??

Thanks!

westfw

Are you sure you're not using "Serial.println()" instead of Serial.print() ?

regatta

Hi,
sure, I have try also serial.write() but is the same thing!

PaulS

So, now you need to post your code. It is unlikely to be a hardware problem.

regatta

Thanks to all!

It was a SW problem! I was using the analog button library that have an hidden serial.println() in it to trasmit the number of button pressed.I have modified the AnalogButtons.cpp file and now it's working well!


regatta

Sorry, but slang is not for me.

What want you say with " Wacky liby time " ?

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy