Go Down

Topic: Not the Arduino but a custom Wiring board (Read 587 times) previous topic - next topic


May 05, 2009, 10:07 pm Last Edit: May 05, 2009, 10:07 pm by Starfire Reason: 1
So here is a youtube video of my own wiring mini clone but I've added a couple things.

1.  Fully compatible with wiring
2.  On board USB
3.  Standard breadboard layout (Leave a row on each side open of    
4.  Fully regulated power supply (6 to 15V)
5.  Dedicated VCC and GND pins.
6.  Power, TX, RX, and Pin 48 LEDs
7.  1"x3.1" (Small)
8.  ISP header

Link: http://www.youtube.com/watch?v=e9688gCgzdI&feature=channel_page

Go Up