Go Down

Topic: Cannot install driver (Read 636 times) previous topic - next topic

mi6anja

Windows cant find driver for my arduino uno R3.0

mi6anja

1

mi6anja

#2
May 05, 2014, 12:55 pm Last Edit: May 05, 2014, 01:51 pm by mi6anja Reason: 1
this is my arduino uno r3
optiboot 8

spycatcher2k

Thats not an arduino R3 its a clone - look where you bought it for drivers, or at least the name of the USB Bridge chip they used.
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

geektm

I have the same board with the same problem. It has ISP because 13 pin is blinking. It appears in other devices as USB2.0-Serial and at Com 1. When I load one program it gives me that error:



please Help, I'd be grateful of any advice.

spycatcher2k

The Chip next to the USB has numbers on the top of it - can you post that information.
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

spycatcher2k

also - do you have a link where you bought it?
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

CrossRoads

12 MHz crystal next to it, likely it's a CP2102 or PL2303 type chip.
It if was FT232, wouldn't need a crystal.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

geektm

http://www.ebay.es/itm/Arduino-Uno-Atmega328P-PU-R3-REV-3-Cable-USB-Version-Compatible-D1/221409432836?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D6687845735528392996%26pid%3D100015%26prg%3D1006%26rk%3D1%26rkt%3D10%26sd%3D271409117757%26clkid%3D6687846944217129483&_qi=RTM1685972

WCH CH 340 at the little chip next to usb connection

spycatcher2k

Did a basic search for the chip number with the word driver after it and guess what! I found it

Please use GOOGLE to search not ME.
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

geektm

Thanks Bro ! I'm really happy with ur support ! I didnt know how that worked, sorry. Can u solve me another question ? Can i use that board as a keyboard ? I mean, can i use it as a makey makey ?

spycatcher2k

No - The makey Makey is based on the 32u4.
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

Go Up