Go Down

Topic: Arduino UNO schematics do not match the actual board (Read 5194 times) previous topic - next topic


guys, I bought the starter kit and am checking it out. One thing which seems odd is that the schematcs (as published at http://arduino.cc/en/uploads/Main/Arduino_Uno_Rev3-schematic.pdf) show two processors - ATMEGA16U2 and ATMEGA328P.

The actual hardware as arrived (and as shown on the site: http://arduino.cc/en/uploads/Main/ArduinoUno_R3_Front.jpg ) has just one chip - the 328P.

Does any one know what's the deal here, where can one get the actual schematics?



See that square chip just north of the 16 MHz crystal can?  Read the part number on that.
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e


Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131