Pages: [1]   Go Down
Author Topic: can't upload on card  (Read 1649 times)
0 Members and 1 Guest are viewing this topic.
Britanny
Offline Offline
Full Member
***
Karma: 0
Posts: 233
Mais vrai, j'ai trop pleuré, toute lune est atroce
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi

well well,
I've got a prob with one off my card (usb)
when i try to upload file to it the IDE write :
Code:
[VP 1] Device is not responding correctly.


what is [VP1] virtual port ?

the serial port is correct, speed correct, jumpers ok,,,,,
when resetting card, it flashs one time as usual.
this is not an IDE prob, it works fine with my second card.

have an idea ?
how to reset in deep the card ?

eric
Logged

Forum Administrator
MMX
Offline Offline
Edison Member
*****
Karma: 37
Posts: 1139
hallo kompis
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hej Eric,

I think you are experiencing a known bug in the IDE software. When exporting, instead of clicking once in the "Export" button, you have to double-click.

Is it working with this?

/David

PS. the reason why this happens is that the software has to empty (technically called "flush") the serial port before downloading a new program. Arduino-0003 will make it properly
Logged

Forum Administrator
Offline Offline
Newbie
*****
Karma: 3
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

There is also another reason for this error.

If your code is sending data on the serial port back to the computer when the downloader is trying to send the program down to the board if receives these strange characters it cannot understant. This is what causes the message and the solution is normally to reset the board and press the download button again
Logged

Britanny
Offline Offline
Full Member
***
Karma: 0
Posts: 233
Mais vrai, j'ai trop pleuré, toute lune est atroce
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

yes...

it's my fault, i'm playing with the serial port therefore arduino's IDE have prob to uploading but with a double click and a reset touching, it's uploading.

thanks

eric
Logged

Forum Administrator
Cambridge, MA
Offline Offline
Faraday Member
*****
Karma: 12
Posts: 3538
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks for the report.  I added a note about this to the FAQ:  http://arduino.berlios.de/index.php/Main/FAQ
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 3
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

i had the same problem after playing around with this pwd-piezo-speaker-thing.

doubleklick works fine!

thank you,
hans
Logged

Forum Administrator
Cambridge, MA
Offline Offline
Faraday Member
*****
Karma: 12
Posts: 3538
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Also, this problem should be fixed in the next release of the Arduino software.  Thanks for your patience.
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 6
I love YaBB 1G - SP1!
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hey,

I have the same problem, after playing with the pwd-piezo-speaker-thing, my arduino refuses to receive new data. I tried the doubleclick way, but  then I get
[VP 1] Device is not responding correctly.
Programmer is not responding.

So I am not quite sure: should I reset the Arduino between the two clicks ? (I guess not and I also tried that way without luck).
Is there anything I could try to solve my problem ?

Thanks
Logged

Britanny
Offline Offline
Full Member
***
Karma: 0
Posts: 233
Mais vrai, j'ai trop pleuré, toute lune est atroce
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

reset the card
and double click...
it should works

eric
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 6
I love YaBB 1G - SP1!
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

ok, sorry people.

i managed to borrow another card and i get the same problem so i guess it'a a problem between my computer and me.
Logged

Pages: [1]   Go Up
Jump to: