Pages: [1]   Go Down
Author Topic: programmer is not responding problem  (Read 442 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 6
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

i am new to the ardunio board any trying to get an LED  fading piece of code on the board, but cant seem to upload it. the error writes programmer is not responding, RESET the board right before exporting.

if anyone has any ideas what the problem is as i have tried reseting it and still have the same problem.

many thanks
james
Logged

Forum Administrator
Cambridge, MA
Offline Offline
Faraday Member
*****
Karma: 12
Posts: 3538
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Did you check the FAQ ("Why I can't upload my programs to the Arduino board?")?
http://www.arduino.cc/en/Main/FAQ
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 6
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

yeah have checked everything and looked at other peoples problems. the 2 usb ports on my mac are being reconised. and have the baud speed at 9600. i am resettiing right before i upload. but just keeps coming up with the exact same error. bit wierd any other ideas?
james
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Try holding down the reset for a second or two before clicking the upload button then only release after clicking it... this works for me on my powerbook. Also check that you have the correct serial (usb) port selected.
Logged

Pages: [1]   Go Up
Jump to: