Pages: [1]   Go Down
Author Topic: Battery powered arduino - problems with AnalogIn  (Read 482 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 36
blablablabla
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hi,

my arduino is running with 9volt battery block and lm7805. i´m reading sensor data from a gyro sensor which is powered with 3,3volt (LD33). data is being read by max/msp and simple message system. as i recognized that during the time the values of AnalogRead changes with battery load. that seems pretty strange because 7805 should make sure that voltage (and of course reference voltage) is on constant level.

thanks
Logged

0
Offline Offline
Jr. Member
**
Karma: 0
Posts: 91
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

You don't need that voltage regulator. There already is one on the Arduino board.
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 36
blablablabla
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

i build up arduino on a breadboard, so i need it.
Logged

Daniel
Guest
 Bigger Bigger  Smaller Smaller  Reset Reset

Do you have some 220uF or similar capacitors on either side of the regulator? Makes for a nice happy power supply, with better transient response.
Logged

Pages: [1]   Go Up
Jump to: