Go Down

Topic: arduino bluetooth and ubuntu linux (Read 2474 times) previous topic - next topic


Jan 31, 2007, 02:18 pm Last Edit: Jan 31, 2007, 02:21 pm by erich Reason: 1

i got my arduino bt boards today and
i tried to hook it up under ubuntu with little success so far
maybe somebody has an idea how to proceed:

first i did:

erich@pupu:~$ hcitool scan
Scanning ...
       00:15:A0:80:FE:1E       Nokia N70
       00:07:80:82:1F:35       ARDUINOBT
       00:12:62:DB:EA:E7       Erich

to find the bt id (ARDUINOBT)
then i edited:

erich@pupu:~$ sudo vi /etc/bluetooth/rfcomm.conf
# RFCOMM configuration file.

# example:
rfcomm0 {
bind yes;
# Bluetooth address of the device
device 00:07:80:82:1F:35;
# RFCOMM channel for the connection
channel        1;
# Description of the connection
comment "ARDUINOBT";

and after:

erich@pupu:~$ sudo /etc/init.d/bluez-utils restart

now i have a linux bt serial device rfcomm0 which shows with

erich@pupu:~$ rfcomm
rfcomm0: 00:07:80:82:1F:35 channel 1 clean

i edited then the preferences text in ~/.arduino/preferences.txt
and changed the following:


if i now start the ide, compile a program and upload it, i get a:
/dev/rfcomm0 permission denied.
in the ide message window and command line.

the output of rfcomm changes to:

erich@pupu:~$ rfcomm
rfcomm0: 00:07:80:82:1F:35 channel 1 closed

but i m in group dialout and the rights are the same like for example for /dev/ttyUSB0 which
works without problems on the usb arduino board. also chip is set to atm168 and serialmonitor to 115200.

maybe somebody has an idea

thx a lot


ps: the bord works fine under windows !


I thought I read somewhere that you couldn't program the board with the BT connection. Are you saying that you can program it with BT under windows?


Jan 31, 2007, 03:17 pm Last Edit: Jan 31, 2007, 07:48 pm by erich Reason: 1
i had the impression i did so


to quote form the arduino hardware page:
"Bluetooth - This is the latest version that eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone."




Hello bigengineer

can you tell me where you read that?:)


can you tell me where you read that?

No, I can't. I looked around but couldn't find it. I think it was somewhere here in the forum. Maybe someone who was trying to program with a bluesmirf module? But I couldn't find anything usefull with "bluesmirf" either.

I also that the hardware page changed while I wasn't looking. Maybe I should check 3 times a day.


it's the description posted on the hardware page


Go Up