Go Down

Topic: avrdude: stk500_recv(): programmer is not respondi (Read 601 times) previous topic - next topic

orangeperson

Greetings. I have:
Arduino NG rev. c with Atmega 168
Ubuntu Feisty Fawn

I've uploaded programs to this board before.  I think it was on Windows, but I'm not sure on that account.  The board has been in my drawer for a while, so it might have a hardware problem.

I opened up the Arduino software, and selected Arduino NG.
Got some warnings:
Quote

In file included from utility/twi.c:25:
/usr/lib/gcc/avr/4.1.0/../../../../avr/include/avr/signal.h:36:2: warning: #warning "This header file is obsolete.  Use <avr/interrupt.h>."
In file included from /home/tim/dev/arduino/arduino-0010/hardware/cores/arduino/WProgram.h:6,
                from Stepper.cpp:48:
/usr/lib/gcc/avr/4.1.0/../../../../avr/include/avr/signal.h:36:2: warning: #warning "This header file is obsolete.  Use <avr/interrupt.h>."
In file included from /home/tim/dev/arduino/arduino-0010/hardware/cores/arduino/WProgram.h:8,
                from Stepper.cpp:48:
/home/tim/dev/arduino/arduino-0010/hardware/cores/arduino/wiring.h:60:1: warning: "abs" redefined
In file included from /home/tim/dev/arduino/arduino-0010/hardware/cores/arduino/WProgram.h:1,
                from Stepper.cpp:48:
/usr/lib/gcc/avr/4.1.0/../../../../avr/include/stdlib.h:116:1: warning: this is the location of the previous definition
In file included from /home/tim/dev/arduino/arduino-0010/hardware/cores/arduino/WConstants.h:1,
                from Firmata.cpp:31:
/home/tim/dev/arduino/arduino-0010/hardware/cores/arduino/wiring.h:60:1: warning: "abs" redefined
In file included from Firmata.cpp:28:
/usr/lib/gcc/avr/4.1.0/../../../../avr/include/stdlib.h:116:1: warning: this is the location of the previous definition
Firmata.cpp: In member function 'int FirmataClass::available()':
Firmata.cpp:70: warning: no return statement in function returning non-void
Firmata.cpp:70: warning: control reaches end of non-void function


Then I tried to upload something, I got this:
Quote

Binary sketch size: 1114 bytes (of a 14336 byte maximum)

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding


Is something supposed to blink when I hit reset?  Nothing really seems to happen.
An LED connected from +5v to GND works fine.

Go Up